LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Part of last weeks woodscore, was was 4 pre laminated boards, that seemed perfect for cutting boards. After looking a little further/cutting them down, I see many cracks in the joints. My question is what's the best way to fill these cracks? I'm using Watco butcher block oil on them.
Thanks for any help!
 

·
Registered
Joined
·
1,191 Posts
one concern i would have if you did not glue these up, is whether a waterproof glue was used. This is critical for a cutting board application.

As far as gaps, you can fill them with a glue/wood dust mixture. If they are larger, you could shave pieces of matching wood and carefully glue them into the gaps.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top