IN-LINE INDUSTRIES - Contractor Saw Precision Alignment & Locking System (Rating: 5)

After reading several reviews and watching every video I could find, I decided to try the Contractor-saw PALS alignment system.
Previously I was using a bar clamp to pull the rear trunnion into alignment as I tightened the bolts.
It was a hit and miss process and I really didn't have a good way to measure my results.

I coupled the PALS with this jig I found posted here on Lumberjocks: http://lumberjocks.com/projects/96896

The PALS do exactly what they claim to do. The instructions were clear and the video walks you through it step by step. It is a little fussy to adjust but I had my Powermatic 64A aligned perfectly in about 15 minutes.

Time will tell if the saw now stays in alignment. That may bring an edit to this review in a year or so but for now I am a big fan.