LumberJocks Woodworking Forum banner
1 - 11 of 11 Posts

· Registered
276 Posts
Discussion Starter · #1 ·
Scraps of Ipe, ripped to 3/4"x3/4". I'm not the best at jigs, but this is working. Stock held in place with wedges,
first cut with 3/8" bit, final cut with 1/2", in two of the same kind of router. Works with any length of pieces, but if too short they won't assemble. So far they have gone together very solid without glue.

Light Wood Rectangle Cross Religious item
Rectangle Wood Wood stain Floor Hardwood
Wood Wood stain Hardwood Plank Lumber

Wood Wood stain Hardwood Gas Machine tool


1 - 11 of 11 Posts