LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 12 of 12 Posts

·
Registered
Joined
·
1,699 Posts
I've got a garage shop that also houses a car. Because of this, I don't think it is feasible to just lock the whole shop to prevent a child from getting in and hurting themselves. While I'd like to think they would always be with a parent while in there, I think the reality is that as my kids get older, they will have access to the garage unsupervised.

I'm just wondering what everyone else in this situations does. I already understand the concept of teaching kids about what they can and can't touch and all that, but it is not a replacement for a backup safety plan. I'm pretty sure at some point a child may be tempted to show off for a friend or see what a button does when they push it.

Some examples are listed below:
-I've noticed that most of my bench tools have removable plastic keys. Does anyone actually use these?
-What about hand tools? Do these get locked in cabinets?
-What about portable power tools? Do you turn off a breaker to keep those inoperable?
-Solvents can be pretty powerful in a small space too, so a locked cabinet?

These are just some things I'm thinking about in advance of my first child being able to crawl/walk. I figure it will give me enough time to take any necessary saftey precautions. Maybe it will help some other people with ideas they hadn't come up with on their own.
 

·
Registered
Joined
·
832 Posts
I am in a similar situation with my garage/workshop. I lock it, plain and simple. Beyond that, I unplug all tools when they aren't in use, and I store all of my sharp stuff high where they cannot reach it if they were to get in. As far as the little plastic keys go, I would be to afraid of losing them to take mine out. Pulling the plugs, throwing the breakers etc… those are the best way to prevent accidents.
 

·
Registered
Joined
·
4 Posts
Hello! Before your child is crawling, walking and becoming a lot more mobile, it would be a good time to child proof your house. Get down on all fours and search the house for potential hazards to your child.

Remember that in addition to childproofing your own home, make sure that your child safe at daycare or when visiting friends and family. Do grandparents have medicines out of reach? Does your neighbor have a gun in the house?

scrap metal steel
 

·
Registered
Joined
·
1,329 Posts
I tried child-proofing my house, but they still got back in … ba-dum-dum. Yeah, it's an old joke.

As long as you've got a little time before the little folks can wander, I might look at isolating all my power tools on a separate circuit that could be turned off and locked. And, of course, all hand tools in locked cabinets.

And I'll tell you from experience, that no matter how much the youngsters know about what they are NOT to touch, showing off for their friends is and almost irresistable temptation. It's wise to be thinking ahead.
 

·
In Loving Memory
Joined
·
153 Posts
Russel is right about temptation and kids. A separate breaker for all my shop tools and locking or puting items high up is how I kept the kids "Honest" most of the time. One item I didn't think about untill I had to clean up spilled stain was step stools/ ladders, made short people tall. Just glad the went for the stain and not the sharp tools
 

·
Registered
Joined
·
160 Posts
When mine were very young and as they got older I would often take them into the shop and show them just how dangerous my tools are. I do lock it now but I also know my kids respect the tools for the damage they can do. It helps to have girls too that are a little scared of my saw!
 

·
Registered
Joined
·
4,420 Posts
I remember growing up being in the shop with my Dad a lot. I learned about tools and about what they could do. I don't ever remember 'getting into' the tools because they were not something I was curious about because I got to use them with Dad. I try to use the same philosophy with my kids, they (at age appropriate levels) get to use different tools. They are 4 and 6 now and have been using a block plane and hammers of course. So I think they (as I did when I was wee) see the tools as something to use WITH Daddy and not something to be played with. We just bought Paul (4) a hammer so he could help us with rennos. Now the whole family pitches in to do whatever job is needed. Its sometimes takes more time then doing it ourselves but we hope we are teaching the kids that they can use tools and use them safely, and hopefully, effectively.

Of course I unplug everything and flip breakers also…they are kids after all :)
 

·
Registered
Joined
·
599 Posts
I agree with Mark. The best thing I did to childproof my shop was to have my young sons out there with me!

Granted, I unplugged the tools at the end of each session - or more correctly, my sons did the chore for. And they were quick to remind me if I forgot!

They weren't allowed to use the power tools, but could use the hand tools. I built them their own scaled-down benches. I bought them their own (REAL) tools over time. I built them their own tool boxes. And most importantly, I taught them to take care of their tools.

Today, my "little boys" are 23 and 24. One is an engineer and the other teaches high school. But both of them know their way around wood, and plumbing, and electricity, and concrete, and all the other disciplines they followed the old man around!

So rather than prohibit their entry, encourage it. Just remember the education piece! It always took me twice as long to get anything done when they "helped" - but I wouldn't change a thing!

Now, I'll get off my soapbox.
 

·
Registered
Joined
·
278 Posts
Wow! Good responses! I learned a bunch just reading the answers. Bowyer, I have a separate circuit as well but never thought of it as a child proofing tool. Great idea!

I do use the plastic key proofers but I drill a hole in it and run a cord through it so it doesn't go bye-bye. I know that's kind of a halfway measure but better than nothing I hope.

I also educate my kids on exactly what the tools can do and demonstrate to them how the tools work. I emphasize that flesh is nothing compared to the density of oak or maple. So far, so good.

As a cop I have the same issues with firearms in the house. However, they are ALWAYS under lock and key when they are in the house. I wish I could secure the tools in that manner but the shop is also a garage so the family accesses it all the time.

Ultimately, you have to take all of the reasonable measures you can and try your best to raise your kids with a respect for the tools in the shop. Thanks for all the tips folks!
 

·
Registered
Joined
·
8,321 Posts
My youngest is 10 now, but there are still younger neighborhood kids around. The rules are that no kids get over near the shop, but because it's just the other side of the garage where bikes and outdoor toys are stored, I still needed as many failsafes as possible, and still follow them out of habit.

Keep sharps out of reach and out of sight…possibly under lock and key. Same for chemicals. Defeat the power to any power outlets if possible, plus unplug the tools, lower the blades, remove cutters, etc., or all of the above to foil ambitious little investigators.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top