The Gramercy holdfasts from ToolsForWorkingWood.com (Brokline, NY) are great. They are not cast, but made from 3/4" steel "wire". Unbreakable.
Shipping cost to Austrailia is always a fright.
Shipping cost to Austrailia is always a fright.
Buying Holdfasts in Australia?
So I've done a quick google search and only managed to find a single retailer in Australia that sells holdfasts and sadly have to admit they looked pretty poorly made.
I don't really need them urgently but does anyone know of a place I can get them?
Or possibly an affordable import that actually works and is of decent quality?
I guess there's some historical reason holdfasts didn't especially catch on here but I for one think they're a great device; the best inventions are simple yet effective IMO.
I don't really need them urgently but does anyone know of a place I can get them?
Or possibly an affordable import that actually works and is of decent quality?
I guess there's some historical reason holdfasts didn't especially catch on here but I for one think they're a great device; the best inventions are simple yet effective IMO.
1 - 8 of 8 Posts
Maybe check Etsy? Quite a few homemade versions by home Blacksmiths that are everywhere since Forged In Fire. Maybe one that is nearby or is used to shipping there? Or maybe find/put out an ad in Craigslist? Its pretty easy for any amateur blacksmith to make, to bend a round bar and flatten the end.
Ah, that's a great idea.Maybe check Etsy? Quite a few homemade versions by home Blacksmiths that are everywhere since Forged In Fire. Maybe one that is nearby or is used to shipping there? Or maybe find/put out an ad in Craigslist? Its pretty easy for any amateur blacksmith to make, to bend a round bar and flatten the end.
- SMP
You're quite right; there are several available there. Still pricey but the ones I am looking at include shipping so really no more expensive at least.
I've heard Gramercy mentioned before, they sound reliable at least(as opposed to the cheap cast ones which I assume are too brittle for heavy or prolonged use).The Gramercy holdfasts from ToolsForWorkingWood.com (Brokline, NY) are great. They are not cast, but made from 3/4" steel "wire". Unbreakable.
Shipping cost to Austrailia is always a fright.
- Ocelot
Yeah, it's the shipping costs that make it difficult. Buying anything 'budget' then spending half as much again for shipping feels like a waste.
If I use PostMate to get a pair sent through a proxy US address the cost comes out almost exactly the same as a pair of hand-forged ones that are 15mm thick rather than 19mm.
So my next question is how much that extra diameter matters?
I'm guessing the forged ones would still hold their own compared to the more pliable Gramercy 19mm but maybe it's more of a factor than I think.
I'd probably go with the forged ones otherwise; they just have that extra character at the end of the day.
The diameter is more to do with the holes you make. In the US, its common to use 3/4" holes for holdfasts and bench dogs. 19mm is like .7486 inches so very close, whereas 15mm is closer to .59 inches. So a 15mm holdfast would need to have a 15mm hole, or maybe a 16mm hole.
Naturally I would match the hole size but thanks for clarifying.The diameter is more to do with the holes you make. In the US, its common to use 3/4" holes for holdfasts and bench dogs. 19mm is like .7486 inches so very close, whereas 15mm is closer to .59 inches. So a 15mm holdfast would need to have a 15mm hole, or maybe a 16mm hole.
- SMP
In terms of size I probably prefer the 19mm variety as a 20mm hole works quite neatly with decimals but I'm not actually going to measure using their span so the ocd part of my brain will just have to get over it.
The smaller size is probably more proportionate to the functional sawbench I'm going to build anyway.
I'm surprised the larger available size is for 3/4" actually; surely someone at some point said "screw it, I want a full inch thick holdfast!"
I would buy a high quality commercially made one if I was you.
If holdfasts are not made right, they will slip.
I am sure some people on Etsy get it right, but others will not.
I would hate to see you spend all that money and get one that does not grip the dog hole well.
If holdfasts are not made right, they will slip.
I am sure some people on Etsy get it right, but others will not.
I would hate to see you spend all that money and get one that does not grip the dog hole well.
Keep in mind another key point of holdfasts is the thickness of the surface you are using it on. There is a sweet spot, usually a range. If its too thin it won't hold, if too thick it won't hold either. I have the Gramercy ones, my bench is about 1 7/8" thick and my saw bench is 1 7/8" thick and they work well in either.The smaller size is probably more proportionate to the functional sawbench I m going to build anyway.
- LumberZac
1 - 8 of 8 Posts
LumberJocks Woodworking Forum
A forum community dedicated to professional woodworkers and enthusiasts. Come join the discussion about shop safety, wood, carpentry, lumber, finishing, tools, machinery, woodworking related topics, styles, scales, reviews, accessories, classifieds, and more!
Full Forum Listing
Top Contributors this Month
View All
bandit571
169 Replies
Desert_Woodworker
147 Replies
JackDuren
69 Replies
Recommended Communities
