LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 4 of 4 Posts

·
Registered
Joined
·
630 Posts
Here is a Youtube video that someone made from the Woodsmith plans, with some modifications.


I have an Incra router table w/fence - I use their system. However, before I purchased that, I made some simple box joint jigs that adapted to my miter gauge. From what I see from the Woodsmith kit, I would probably use that if I didn't have my Incra system.
 

·
Registered
Joined
·
1,636 Posts
You can make your own box joint jig by making a miter sled with a slot, an indexing pin, and a spacer. It took me about an hour to make one that does a perfect job. Make sure you note the exact stacked dado blade configuration you use.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top