LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
1 - 1 of 1 Posts

·
Registered
Joined
·
217 Posts
Not having major problems. my Q is were does blades need to track on wheel. I am running the gullets of the blade in the center of the wheel on top, but it is not in same place on bottom. every where I look for answers i get just that the blade should run in center of wheel .
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top