LumberJocks Woodworking Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
752 Posts
Intro

Updated 1/15/12

How to make an Art Box

by Andy Campbell

Safety

Be safe! Guards, etc…may not be visible in the pictures. This is written for woodworkers of all skill levels.
But, please keep in mind that this is not woodworking #101. I am writing this in a step by step manner that should be easy for a beginner to follow, but some basic understanding of tools and terminology is required.
I ask that the more advanced woodworkers be patient and not be offended. I don't wish to test your patience or appear to be condescending…just helpful to a mixed audience. I have my own way of doing things, but as a self taught woodworker, some of them are unconventional. I am not trying to teach you how to do things my way, but just showing you how I do things. Do each step in a way YOU are comfortable with.

Style
Definition of Art Box -A box with a medallion in the lid that resembles a picture in a frame. The body and lid may be shaped or not.
Let's take a look at a few styles, each with a slightly different lid and hinge set up. Note how the shaping varies on each one.
1) The first one hinges on brass pins allowing it to swing down into the box.

Rectangle Wood Bag Cuisine Tints and shades


2) The main difference here is that the lid sets into a lip of the box body on only three sides. It uses barrel hinges so it does not drop into the box at the back.

Brown Wood Rectangle Packing materials Bag


3) This box is very different from the other two. It has a frame and panel style top, uses butt style hinges and does not set into a lip at all. The lid is sliced off the box after assembly. It uses butt style hinges. The shaping is very different and the bottom was raised up enough to allow cutouts to add a footed look.

Luggage and bags Bag Rectangle Chair Wood


The construction is very similar for all of these boxes, but at a certain point they head off into their own direction.

The Chapters will cover the following:
#1- Introduction
#2- Wood Selection
#3- Making the Box
#4- Corner Splines
#5- Cutting the Lip of the Box
#6- The Lid
#7- The Medallion
#8- The Handle
#9- It all Hinges on This
#10-The Pin Hinge
#11-Butt or Barrel Hinges
#12-Shaping
#13-Finishing
#14-Dividers

Andy
Already added to my "watch list" many thanks
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top