LumberJocks Woodworking Forum banner
1 - 1 of 1 Posts

· Registered
656 Posts
Okay, you finished high school, now the learning starts...

One of Charlene's friends from a college years ago has two kids who've recently graduated from high school. The elder dived into travelling around Europe and heading off to college on the other coast and generally diving into life. The younger, Daniel, is an Eagle Scout, but post high-school has been casting around trying to figure out what he wants to do. He's been feeling stuck in a small town up in the Sierra foothills, and we've dragged him down to closer to the cosmopolitan big city. He's been noodling around with a guitar, so we introduced him to some musicians, and talked about other things that might happen around guitars.

He came to visit just as we were finishing up building our workshop, helped out a bit on that, and I made some noises about how if he wanted a really cool guitar he should come down and hang out for a couple of weeks and build one.

A week ago he called my bluff. So he arrived, and he spent a few days searching the web for templates and hardware, and after a while we settled on some drawings we found of a 1950s Les Paul as a starting place. He marked up those a bit, drew a different peg board headstock, changed the shape of the horn on the bottom. We then dug through my wood stash, and ended up deciding to go with a through neck laminated of Walnut and Maple, with a body composed of quilted Maple over a center of Mahogany, with a Pao Ferro fingerboard that I'd snagged out of the seconds pile at Luthier's Mercantile last time the local woodworking group had a meeting there. With a little bit of Purpleheart I had lying around for trim.

Taking a deep breath, I pulled out my credit card and clicked "Buy" on the brass hardware he wanted, and we went out to the shop and started to get to work. First up, using the jig saw to make a template:

2012-12-06DanielWithFirstTemplateAttempt.jpg 2012-12-06DanielPlaysAirGuitarTemplate.jpg 2012-12-06DanielCutting2ndGuitarTemplate.jpg

The second template came out better, though we had a lesson in router bit management that meant that as we were testing that template we dinged the crap out of it. Fixed it with putty. Daniel started to see possibilities. Then we drew out the neck on a piece of wood, and I went off to work while he cut the neck. Mostly. He got the Walnut right, but because of various issues in wood management it took three tries to get the maple blank. Measure once, cut twice.

Neck clamped and glued, we used a couple of bearing bits on the router to machine the top flat, and clean things up.

2012-12-07DanielCuttingGuitarNeck.jpg 2012-12-07GuitarNeckGlueUp.jpg 2012-12-07DanielRoutingGuitarNeckFlat.jpg

Then he had enough router experience to go off and do the body cavities:

2012-12-08GuitarRoutedPotentiometerCavity.jpg 2012-12-08DanielDrillingGuitarTemplateForSwitchCavity.jpg

While he was distracted with that, it was time for me to do some learning. I got to work gluing up a Maple and Purpleheart assembly for the neck pips and experimenting with building an inlay system, so that he could route the neck inlays and we could then work on sanding and fitting the inlaid pips. And carefully, ever so gingerly, cut the fret notches

2012-12-07GuitarNeckPipInlayGlueUp.jpg 2012-12-09GuitarFretboardPipTestFitted.jpg 2012-12-09GuitarCuttingFretNotches.jpg

Then he went inside for lunch, and I snuck over to the planer and smoothed and sanded the whole thing, wandered into the kitchen and surprised him with it. I think this was the moment where we went from "we're building a guitar" to "we're building a freakin' awesome guitar, dude!". And with that we went back out into the shop and drilled out some switch cavities, and did the first glue-up on the lower body part.

2012-12-09DanielHoldingPlanedGuitarFretboard.jpg 2012-12-09DanielDrillingGuitarSwitchCavities.jpg <a href="">2012-12-09GuitarLowerBodyGlueUp.jpg

Today hopefully when I get home he'll have cut out the pegboard headstock and we can start with the neck shaping!

Similar content at my personal site
Guitar builds are awesome to follow along on. Great progress .

Thanks for sharing.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.