Joined
·
112 Posts
I have my dad's old Ward's Powr-Kraft model TPC-2610A radial arm saw from 1966 and no room in my shop. He was a putterer and probably used this saw less than fifty hours.
I replaced the particle board table, and used it slightly. I also made a safety "key" for the trigger to replace the long lost one.
Runs like a champ. I have the original manual and other literature that is related. The original cabinet with drawer is underneath along with a few adjustment tools. Sorry, no auxiliary spindle attachments.
I would consider trade for;
~ Exotic hardwood scraps (minimum 5/8×5/8×6") with interesting figure
~ Dust collector (1.5 hp minimum)
~ Set of gouges in good shape
~ $150.00
~ What do you have that might help me produce my little woostuffs? See at DustyNewt.com
If interested, email pics of what you'd like to swap to [email protected] The saw would have to be picked up at my home in Haines City, FL.
Peace in Wood,
Scott
I replaced the particle board table, and used it slightly. I also made a safety "key" for the trigger to replace the long lost one.
Runs like a champ. I have the original manual and other literature that is related. The original cabinet with drawer is underneath along with a few adjustment tools. Sorry, no auxiliary spindle attachments.
I would consider trade for;
~ Exotic hardwood scraps (minimum 5/8×5/8×6") with interesting figure
~ Dust collector (1.5 hp minimum)
~ Set of gouges in good shape
~ $150.00
~ What do you have that might help me produce my little woostuffs? See at DustyNewt.com
If interested, email pics of what you'd like to swap to [email protected] The saw would have to be picked up at my home in Haines City, FL.
Peace in Wood,
Scott
