Stuff I Wish I Had Known

  • Advertise with us
Blog series by Pat Gornet updated 02-19-2013 10:59 AM 1 part 2375 reads 4 comments total

Part 1: Measuring Miters

02-19-2013 10:59 AM by Pat Gornet | 4 comments »

This is something I struggled with for a while and only recently have been able to do the math for. Purrmaster had asked how and most of this is my response to his question. If you want the inside of the frame to be 8 inches in length then, with a board of 2 inch in width, you would add the width times 2. so with a 2 inch wide board the out side of your frame will be 12 inches. However, if you want to account for the rabbet that you set the picture into then you have to do a bit more math...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics