LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 22 Results
  1. 2020 Christmas Ornament

    My family has a tradition where every year we each get an ornament to commemorate something important that happened to us throughout the year. An example: the year I got my driver's license the ornament for me was a car. This year I used my CNC to make a collective ornament for everyone in the...
  2. Nativity Scene Christmas Ornaments

    A few nativity scene ornaments I made on my CNC this year to give out as gifts. They're made from red oak with a light shellac finish.
  3. A family tree for 2021

    TL;DR: Wife is pregnant after a miscarriage earlier this year. I made a little family tree thing I saw in a cute Christmas movie that I recommend everyone watch. Back in September, a few days before my wife's birthday, we found out we were going to have a miscarriage. I think I speak for both...
  4. Christmas Snowflakes on the CNC

    I signed up for a RedditGifts ornament exchange and wanted to try something I've never done before with my CNC, two-sided carves. I'm extremely happy with how the snowflakes came out. The snowflakes are Mahogany and Cherry
  5. Bitcoin Paper Wallet holder/Gift Card Box

    In early January the value of Bitcoin reached a new all time high of around $40,000 per Bitcoin. During that time I had a conversation with a coworker about Bitcoin and unintentionally mentioned how many Bitcoin I had. He not so subtly pointed out that I was being an idiot holding onto that...
  6. Wood Layer Shadow Box

    This is a 40th Birthday Present for my Sister in Law. it is a wooden shadow box of the Virgin Mary. It is made of 5 different hardwoods. The frame is walnut with maple spline joints. The back is purple heart, the clouds are maple, Mary is African mahogany and the roses is zebrawood...
  7. Epoxy Silk Road Logo Wall Art

    Last year I created a v-carved sign of the Silk Road Logo on my CNC in honor of Ross Ulbricht's 37th birthday. It has rapidly become my best selling sign in my catalog to date and this year I decided to step up my game by making a series of 10 epoxy filled inlaid wall hangings of the logo to be...
  8. Warrior CNC carving

    A model I got for a few bucks on ebay a while ago I finally found time to carve. After carving I applied 2 coats of shellac, then covered it in brown oil paint and wiped the excess off with a mineral spirits soaked ragged. The paint gives it a lot more depth than simply leaving it plain would...
  9. Earring Box

    Not my best work to go with not my best week. A few days before my wife's birthday we found out she was going to inevitably have a miscarriage. After some thought about what I could get her for her birthday I in light of that news I went out to the jewelry store and found earrings with white...
  10. Make a Passive Amplifier for your Phone with a X-Carve CNC

    Make a Passive Amplifier for your Phone with a X-Carve CNC Watch the YouTube tutorial here Full article and more information click here CNC project making a passive amplifier for your phone that actually works with an X-Carve CNC machine from Inventables Learn how to use Inventables...
  11. Easter Rabbit Bowl project made with Inventables X Carve CNC.

    Easter Rabbit Bowl project made with Inventables X Carve CNC. This project is nice and simple for those wanting to start using there X-Carve 3D Carver straight away after building it. You can also use the below link to open the plans directly in Easel.com and press carve and you are on your way...
  12. Team Red, White, and Blue Plaque

    Here is a some plaques I made for a Veterans Outreach organization that I am a member of. I also made a video where you can see how I made one of these.
  13. CNC carved stamp + turned handle

    Hi all LJ's! After spending some time using the x-carve it's time to share some of it's applications. This time I use it to carve on linoleum to achieve a 1 inch stamp with my workshop logo. I've turned the handle using my small lathe and a scrap piece of Holm Oak. To finish it I prefer to leave...
  14. X-Carve CNC Machine Workstation

    Since I was upgrading and increasing the size of my X-Carve CNC the need for a larger workstation became apparent. Since room in the shop is limited as in most small shops I needed to take up as small of a foot print as possible while maximizing storage space. The top is four feet square and is...
  15. Wristwatch

    I have been doing some cabinet for my shop in the garage and this is the first "non-cabinet" project that I do on my own. The other project were all made within a class setting. I did this project about 2 weeks ago. It took about 4 hours to complete. This is not my design; I bought the plan...
  16. Man Cave sign with Unique Lettering

    I made this unique Man Cave sign on my X-Carve CNC Router. Using a piece of White Pine wood, Stained with Dark Walnut Minwax stain, then V-Carve with a 90 degree V-Bit. Then clear coated the whole thing. This would look good in a Man Cave, especially if he is a Hunter. I designed the project...
  17. CNC Woodworking
    I think I am going to take a plunge on buying a 1000mm X-carve this week. Any advice on where to save money, what items to go ahead and buy with it, and anything I should buy from a 3rd party. I am just trying to keep the price down and get a fully functional machine for the most bang for my...
  18. CNC Woodworking
    I wonder if anyone runs Carveco Maker + on Parallels, Bootcamp, or even better, Codeweaver's Crossover? If so, how do you like it? As we're at the beginning of our woodworking journey, and after having saved up, we're finally pulling the trigger on the tools needed to build our custom...
  19. Blogs
    ★ Exciting news INVENTABLES X-CARVE is on its way and other channel news. ★ Exciting news INVENTABLES X-CARVE is on its way and other channel news. See the Video here Or click here for the full story http://www.onewood.com.au/exciting-news-inventables-x-carve-is-on-its-way/
  20. Blogs
    Inventable X Carve Review CNC 3D carver I was excited when I spoke to Inventables and was offered their new desktop CNC machine called the X-Carve for review, as CNC was something I had wanted to get into for a long time. Here is a link to the video on the build...
1-20 of 22 Results
Top