LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. *updated* Harbor Freight, Wynn filter, Super Dust Deputy dust collector

    You've seen one, you've seen em all… Big thanks to member Nick for the idea. http://lumberjocks.com/projects/363857 His build for the HF dust collection was exactly what i was looking for, compact and mobile. The few things i did different was use a 20 gal can, omitted the factory baffle...
  2. Folded Bowl

    So, it's been a little bit since my last project posting, I hope this makes up for it. It started out as a cherry bowl that I was doing as a demo. I was so please with how it was turning out, how thin I was getting the sides and bottom. And when I went to cut it off the face plate, well I...
  3. Cyclone Dust Collection/Thankyou Jcoulam

    I think this could turn out to be the next End grain cutting board craze. Jeff posted his and what a reaction he received (Jcoulam) LJ. I can't thank him enough I was so sick of cleaning the filter on that vac. now not one thing in the vaccum canister and a clean filter. I added a support with a...
  4. "Reach for the Sky" is a Maple Burl tree carving by Gary "wiz" Burns the treewiz

    This is a fun new Oak Tree carving that I carved out of Maple Burl. Haven't been doing as many of these! This piece measurements are 17 5/8" tall x 7 3/4" wide x 1 1/4" thick. It comes ready to hang on the wall. I call this carving "Reach for the Sky". The carving depicts a steady old Oak...
  5. Shaker table Completed

    This is my shaker table from the TWW guild build. I just got done with the finish and I love it and hope all of you enjoy. The woods used are walnut and tiger maple with a bush oil and shellac finish and a coating of poly on the top. In one photo you will see another table I built at the same...
  6. 22 oz. Tote

    I made this out of Poplar and oak dowels holding the handle in, finished with satin spray lacquer. Gave this to a friend for his b-day, I also had a fun giving him a hard time when I realized he has the same initials as Tim Tebow. I took KnotCurser's advice this time and cut dado's rather than...
  7. HFDC Done!... nearly

    I thought it was about time I should post a project. My apologies for the photo quality, dark basement with phone's camera. I finally made the stand/cart to hold all the components in a more space efficient way. I went with the common cart design out there. Built it with scrap 2×4's and ply...
  8. Power Tools, Hardware and Accessories
    I ordered a Wynn canister filter for my yet-to-be-assembled Harbor Freight dust collector on Friday afternoon. I called the main number listed on their site and Mr. Wynn answered the phone himself. After spending a few minutes talking with him about how I work, the materials I use, etc I...
  9. Power Tools, Hardware and Accessories
    I was looking to add a 35a Wynn filter to my HF dust collector and when purchasing last night I saw that they are going to be increasing their prices effective May 2, 2016. If you need a new one, or looking to pick up your first one, do it soon...
  10. Power Tools, Hardware and Accessories
    Hello- I have a neighbor who wants to get rid of his Wynn canister (35A2BLOL) that he bought for his Harbor Freight DC, because he feels he's to old to bend over to see if it's dirty and dust not want a separator (who knows why). He wanted to trade straight across for the canister that came...
  11. Safety in the Woodworking Shop
    I have a HF DC that I am ordering a Wynn cartridge filter for. I also picked up a furnace fan that I was going to use to build an ambient air cleaner. Perusing the Wynn web site I see that the pleated bag filters like this one Link are Merv 14 and $70 for a 2 pack. The canister filter I was...
  12. Safety in the Woodworking Shop
    I've been reading the forums for a while on a variety of topics. Now looking to get my first dust collector and I'm trying to decide on the filter system to use. I'm pretty set on doing a modified 2 HP Harbor Freight system based on what I've read here. I've noticed that a lot of people have...
  13. Power Tools, Hardware and Accessories
    Has anyone noticed the difference In pleat count or square footage on replacement cartridge filters? I have an Oneida 2hp collector that I've constantly searched for replacement filters for but there doesn't seem to be an identical match. Www.damnfilters.com and Wynn have replacements and they...
  14. Blogs
    (Finally) Upgrading from a Shop-Vac So for the longest time I've heard how much a Shop-vac doesnt quite cut it when it comes to larger machines, and how much quieter "real" DC machines are compared to a shop-vac, but being a weekend warrior, my budget is limited, and space was a big issue for...
  15. Power Tools, Hardware and Accessories
    I have finally seen the light and realize I need a better dust collection system. I have a 1 1/2 HP single stage Fox Shop DC. I have determined there are two acceptable options. 1. Upgrade my current DC with a Super Dust Deputy cyclone separator and a Wynn Nano MERV 15 filter 2. Purchase an...
  16. Power Tools, Hardware and Accessories
    I have been thinking about upgrading my dust collector for a while now, ideally I would like to go to my machinery supplier and say get me a cyclone but unfortunately I dont have the space nor the cash flow to justify such a purchase at this time. so I am thinking about hooking up a separator...
  17. Power Tools, Hardware and Accessories
    I am planning on upgrading my Dust Collector (hereinafter "DC") with the Wynn 35a canister filter. From what I have read this will increase my suction. I was wondering if there is a quick, easy, and cheap way of measuring the suction before and after the upgrade?
  18. Power Tools, Hardware and Accessories
    Anybody got a more elegant solution to this besides those always PITA turnbuckles?
  19. Focus on the Workspace
    A year or so ago I made a decision to either make my workshop a healthier place to be or to give up woodworking altogether. For the better part of 20 years I had been using a Jet 2hp cloth bag dust collector to keep my shop's air clean. I had a long piece of 4" flex tubing that I would just...
  20. Marketplace Classifieds
    I think this filter is pretty well known here but if not search it, Google it, or go here http://wynnenv.com/products-page/woodworking-filter-pricing/35a274nano-cartridge-kit/ I bought the filter but decided to vent my DC outside before I actually ever used it so it's still new. Filter, lower...
1-20 of 21 Results
Top