LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 44 Results
  1. Base ball loft | Custom

    This was a project that we finished and delivered on Christmas eve. It is a baseball loft. It is based off my baseball bed that I normally build with the customizable headboard. This is real similar to the baseball loft I built last August. Here are some of the changes I made to this one. I...
  2. Maple Conference Table | Custom

    This is a 72" x 42" conference table built along with several other items for this client. It features raised panel base with a boat shaped top. I orginally designed and built it with a 3/4" top, but it was not supportive enough, so I switched out the top to an 1 1/2" top. The orginal 3/4"...
  3. Murphy Bed Desk | Custom

    I have mentioned this bed in a previous post but have not had a chance to do a write-up of it's own. This is part of the RSG job that I did which included several desk and other pieces. It is maple with a Gunstock stain from Minwax. It was build couple that lives in one state but runs a...
  4. The Ross | Custom

    This is my Ross Murphy Wall bed. It was completed on 4-3-2008. It is built from maple with a Provincial stain from Minwax. It is a new version of the Ross. The old one has the leg blocks in the center of the door. On the new version the legs are moved to the outside edge. This gives it...
  5. Executive desk | Custom

    This is another piece from my RSG project. This is an executive desk that is 72"w x 42"d x 30"h. The back and the two sides are a wainscot style panel. The front side had a file drawer and two box drawers on one side. The other side of the pedestal had two file drawers. It also had a pencil...
  6. Receptions Desk | Custom

    This is the last piece that I going to post on the RSG project. This is the receptions desk. I just relized that I didn't get any good picture of this desk. I'll post what I have. This desk has a raised panel front with a raised writing surface on one side and a standard desk height on the...
  7. Gun Bed | Custom

    The best protection form people stealing you stuff is for the thief not to know it is there in the first place. This bed did just that. Keep in mind, I don't tell city/state of this customer. It is the customer's design. The headboard lid is removable and exposes a couple trays for hand...
  8. Multi-Colored Baseball bed | Custom

    This is a custom style of the baseball beds that I build. The customer chose to use ash wood to match the bats and then do a custom color scheme. What I like about painting over ash is that the grain comes through. Since ask is an open grain like oak, it give it a texture and a real nice...
  9. Boat Bed Three's a Crowd | Custom

    This is on of three boat beds built for a customer in July 2011. They had two children and wanted an extra one for sleepovers. All three were different. This one was unique in that it had a double stripe to tie the other two boat colors together. All three of the boats had trundles under...
  10. Garage Murphy bed | Custom

    This is a murphy bed that the customer wanted it to look like a garage display at their favorite race car museum. They send me some pictures and I came up with this design for them. The wood was oak to give the bed more if a siding feel to it. The windows were Plexiglas mirrors. This was a...
  11. ARRR The Pirate Ship | Custom

    This is a pirate ship bed that was custom made for an Interior Designer. Their client for this bed is a PGA golfer. It is a full size and I built another one similar to this one back in 2007. This one the designer made some modifications. We added a mast with crows nest, steering wheel...
  12. Perpendicular Twins | Custom

    This is a couple twin beds that I built in May 2007. I had a customer that requested something similar and it reminded me of this project. The beds share the same headboard, which is in the corner. The two beds come out perpendicular from each other. One of the beds has drawers and the other...
  13. More RSC | Custom

    I have just completed more items for my customer RSC. I started out just doing a Murphy bed that I sold over the internet. They link in Colorado but have an office not far from me that they were furnishing. Before that first project was started, they come in and meet face to face and order...
  14. Princess Curio | Custom

    This is a curio cabinet that was built in November 2005. It was an accessory piece for our Castle loft. It has glass doors and a two tone color. The color was the most difficult part on this project. Each edge had to be painted the accent color Size: 48"w x 67"h x 16"d Wood: MDF and Maple...
  15. Princess TV Cabinet | Custom

    This is a TV cabinet that was built to match the Princess Curio built in November 2005. Both of them were built to match the Castle loft. Size: 60"w x 67"h x 18"d Wood: MDF and Maple Finish: Pigmented Lacquer/Latex accent color. For more building pictures like these see my Current Projects...
  16. Slatted Platform Bed | Custom

    This is a reproduction of a platform bed that I normally order in. The last pictures shows the original. This customer wanted some storage drawers. Instead of modifying the stocked version, we built it from scratch. I love the design it is a clean look to it. The pedestal is a 12 drawer...
  17. Boat Bed Full Size | Custom

    This is a boat bed that was completed in June 2010. The wood parts are natural pine with a clear coat. If you notice you'll see a blue one and white one. I somehow made the mistake of finishing it in the wrong colors. I ended up refinishing it. One difference on this one then some of my...
  18. Music Work Station | Custom

    This is a music cabinet that I completed on April 28, 2008. It was designed by the customer and built using paint grade maple and birch. This whole order, which includes a king Murphy bed and a couple of small cabinets, has been about a year in the making. There has been some snags in the...
  19. Brockman 4 Poster Bed | Custom

    This is a kid's bed that was completed in June 2011 and went to Council Bluffs, Iowa. The customer found a bed that they liked but needed a trundle and drawers under it. Since the bed itself wasn't set up for a trundle we started from scratch. The finish was a custom off white color which gave...
  20. Oak Wall Unit | Custom

    This is a wall unit that was completed in June 2010. It has a really neat lighting effect. I positioned the lights behind the shelves and allowed the light to shine through, a fiber optic effect. The doors are a wood/Plexiglases combination. Other features are a full mirrored back, pullout...
1-20 of 44 Results
Top