LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 34 Results
  1. Woodpecker Cane

    Yeaaa…I'm into critter canes lately. This one is a Sapele and Cypress combo. I sort of invented his shape as i went. Thanks for looking!
  2. Woodpecker - Pájaro carpintero

    The little woodpecker is a very fun toy for everyone. To see it in action, watch this video on Youtube: Woodpecker Toy Physics I hope you do yours and can enjoy the sound of his peak … Note: Friction is required in the mast. No wax or fine sanding! Greetings. Martin El pequeño pájaro carpintero...
  3. Router Table Top

    I worked very diligently this weekend to finish the router table top. I added the formica veneer to the substrate, trimmed it. White veneer for the top and a dark veneer for the bottom. I did this so I would know which side is up! Just kidding-I needed the rest of the 4×8 white formica for...
  4. Another Laser Box I’ve turned to.

    Boys and Girls, I have accused C19 for many of my misgivings, however, I cannot continue my vendetta here. On the 10th. November 2020, Assassins Creed Valhalla will be released and to me that is more restrictive than any C19 lockdown… I will be going into a trance and self-imposed...
  5. A Mitre-BOO

    Boys and Girls, On the bandwagon of my Woodpeckers aircraft grade aluminium love fest, I was hesitant to review these mitre clamp sets and thought I'd just brag about the box I made for them. As always, ho-hum, designed in SketchUp and battling the urge to laser cut, I decided to try out my...
  6. Router Table

    For 30 years I have used a 3/4hp router on an old craftsman table (last picture). I finally decided it was time to upgrade, so I built the Ultimate Router Table. Thanks for everyone posting their projects, I took many helpful hints. Now I have a 7518 hooked up to a Woodpecker lift. What a...
  7. 3 Commissioned Frames & Some Shop Goings On

    Our first major job at Spunwood was just the sort of work I was hoping to get: framing local artwork with local wood. James Hicks, the late uncle of the client, is the artist whose work is featured in these frames. They are red oak with a 50/50 (mineral/tung oil) finish. A preview of two...
  8. Router Table

    The Table Base I wanted an inexpensive router table so I decided to make one. This was my first mortise and tenon attempt, so I made a few rookie mistakes, but not anything that couldn't be fixed. The table went together very easily and glued up nice and square. I used construction pine and...
  9. New Router Table part 2

    Okay, these, are some pictures of the new router table. This post is merely going to be an addendum to the part one to show a few extra pictures. The first picture shows one of two 10 gauge hot rolled steel angles that were made for me for the fence. I had originally planned and ordered a 3"...
  10. New Router Table part 1

    I am almost finished with a router table I have been working on since last weekend. It is made primarily of 1/2" and 3/4" mdf sheet. I laminated two pieces of 3/4" mdf for the top. I then jointed all the edges to clean them up. I routed out the hole for the woodpecker lift plate and then...
  11. Router TableBase

    I wound up with a router table top for christmas and am getting ready to build the base. I'll start with sketchup and post its progress as I go. The router table top is from Woodpecker and it seems nice. Given a good support stand it should be a great addition. Stage2: Ok, here is my first...
  12. Whirlygig

    Another Whirlygig, have video but cannot post it
  13. Drill Press Table V1

    EDIT: Pictures are too wide for here. If you want to see them without them being cut off, go to my photobucket drill press library. Well, during football season, not much woodworking gets done. As such, my project over the last three weekends has been a drill press table. I meant to...
  14. Woodpecker's New Assembly Table Top

    Okay, not really, but it should be. They did offer to custom anodize the 48" DP Track for me Woodpecker Red. This table top is designed to sit on top of my router table top. This gives my router table double duty and saves me a lot of space I do not have. I have the option to build a separate...
  15. Router table top

    My 3.25 Horse Freud router died after many years of service, which gave me the expensive opportunity to redo my router table. I purchased the Woodpecker V2 lift and the Porter Cable 3.25 Horse Router to fit the lift. I already had the incra jig, so i incorporated that into my design. I moved...
  16. Parker and Landon's Box of Blocks

    "I can't throw them away." Just a stack of wood cutoffs, taking up space in the workshop. It is hard for me to give them up. They would burn nicely in the fire place (won't do it). Perhaps the garbage? No way, I won't even think of my wood nuzzling next to potato peels. And then, I see...
  17. Built in Cabinets

    Built in Cabinets that I built at the request of the wife. She wanted them to put all the tv equipment and to store the boys toys out of site. I had to build two different cabinets as the two spots left and right of the fire place where not the same. 4th picture is what it looked like before...
  18. Willy Woodpecker Toothpick Dispenser

    I found the idea for this project in Woodcarving Illustrated. Fun and Easy to do.
  19. Marketplace Classifieds
    Woodpecker and Incra sale $225 - as package deal only. With a deal this good I won't separate. I'm selling because I changed my mind and now going with Incra's LS Super System. CASH ONLY! 1 - Woodpecker 24×32 Laminated MDF-Micro Dot Router Table. No fence - Out of box but never used or mounted...
  20. Power Tools, Hardware and Accessories
    I've looked all over for a seller of these blades. Anyone know where to get them in 105"? Prefer the xf.
1-20 of 34 Results
Top