LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 27 Results
  1. Double sided shop sign

    It's like I was reading her mind…The morning I stopped by the shop on my way to work with intentions of offering to make her a new store sign that was bold and stood out & you could see it from the street at 25mph. Her other sign sucked, and you had to really look for it with the small lavender...
  2. First Routed Sign

    Wedding present for a good friend. First time using a router to create a wooden sign. A lot of fun and a good learning experience, looking forward to making more.
  3. Film Strip Picture Sign

    This week I made a picture sign, made too look like a Giant Film Strip. Its made from White Pine wood, carved on the X-Carve CNC, add a little paint and pictures. You can check out the video on my Youtube channel here. Thanks for checking out my project the week. You can also see more details...
  4. ''ROAD SIGNS''

    Not exactly road signs….those are direction signs for some restaurant. Walnut boards 50×20cm, laser engraved, than painted with water based white colour, finish sprey laquer. Columns - firwood, base- pine boards. Boards were screwed to column at the back. It is 180cm high.
  5. WOODEN SIGN

    Wooden sign made of walnut (I came to possesion of some boards of ''young'' walnut tree - it didn't turned brown yet). Dimension 80×30cm. I transfered printed pattern with indigo to wood, than carved all with 3 and 4 mm router bit 1 mm deep. I painted letters groves with black water based...
  6. SIGN / DISPLAY

    100X50 cm firwood board, 18mm thick, with hooks to be hanged on chains. Tractor and letters - 4mm plywood. I cut tractor on scrollsaw than decorated with pyrography. I cut letters on bandsaw, paint them with spray paint and glued/stapled. Everything is covered with two layers of non glossy...
  7. OSB / PLYWOOD SIGN

    I made that sign for dogs beauty salon. Dimensions 120×40cm, 18mm OSB plate and 10mm plywood birch letters. I rounded plate's edges with router and put two hooks on. It will hang from ceiling on chains. Leters were cut on bandsaw and spray painted, after primer. As I understand Latin (as far as...
  8. WOODEN SIGN

    Chestnut sign 130×21cm, handcarved with router straight bit fi 6mm, 2mm deep. Painted with black, waterbased colour, sanded, finish teak oil. It said: ''This house enter smart and dumb, but exit all equal'' ....meaning, after few drinks…LOL
  9. Bar sign

    18mm playwood sign, 50cm height, 260cm total lenght. Finish black spray paint. Fastened to back board with black ''dry wall'' screws (so they are invisible).Printed template cut on bandsaw. Another pleased customer.
  10. ''ROAD SIGNS 2''

    One more ''road sign'' project for same customer (hotel-restaurant) Walnut boards 50×20cm, laser engraved, than painted with water based white colour, finish non glossy laquer. Columns - firwood, base- poplar boards. Boards were screwed to column at the back. It is 180cm high.
  11. Dog Wood Sign

    For this project I used a 1×8x6 pine wood and used my cricut machine to cut out the vinyl. On the back I used my laser to in engrave message. For a how to video and free plans/free SVG file for this project click on Video Link: Thank You For Checking Out This Project! Don't Forget To Click...
  12. PIRATE STYLE SIGN

    Custom ordered, pirate style sign for restaurant. Dimensions 3×0.5 m. Base board was made of 23 mm firwood - three boards glued with biscuites. Top frame I glued and additionaly nailed with wide head nails - just to get that rustic pirate style. Also I burned all with small hand torch burner...
  13. LED Wooden Football Sign

    Hello football fans. This sign was inspired by a pattern by Steve Good. The wooden front of the sign is made from solid oak. The solid oak piece is mounted to a piece of frosted acrylic. The lighter wood on the back side is Baltic birch plywood. The sign is then set in an LED lighted base...
  14. WOODEN SIGN

    Walnut sign with router handcarved letters. Dimensions 60×40 cm, 1 inch thick. I intentionaly left surface with saw marks - customer's request, so surface isn't 100% flat. I glued two live edge boards with wooden cookies. That's why depth of letters varies from 2 to 4 mm. Since it is some young...
  15. PLYWOOD SIGNS

    Birch plywood : 200×50cm / 18mm 100×30cm / 10mm I cut almoust all on bandsaw, some parts with scrollsaw. The base is only to take photos….I made only sign. Finish base paint, than after sanding, spray paint red and white. The customer will glue parts on his wall somewhere…
  16. WOODEN SIGN

    Wooden sign ''Fishing house…'' 200×50x2.5 cm, larch. Two 25cm boards glued together with biscuits. Live edge was completely made by 30 degree tilted jigsaw, burned with small gas torch. Letters and fishes were carved by small router, 6mm straight bit, coloured black, some part of fish made with...
  17. My workshop sign

    I made sign for my workshop/garage - pine board 60×30x2cm, letters made by pyrography. Finish - two coats of non-colour varnish. For all who wan't to know what was written, please use Google translate.
  18. My workshop sign

    I made sign for my workshop/garage - pine board 60×30x2cm, letters made by pyrography. Finish - two coats of non-colour varnish. For all who wan't to know what was written, please use Google translate.
  19. PLAQUE - CROATIAN FLAG AMBLEM

    Plaque which I made for American embassy Marine security guard member, who is leaving Zagreb service. Specific orders were that background must be black and all elements stacked on each other. I choose not to colour anything. I rather used wood natural colours - padauk and wenge. Some elements ...
  20. TABLETOP SIGN

    18 mm birch plywood, 25×12 cm, 15mm ash base, finish wood oil, cut on bandsaw. ''L'' supported with 6mm dowel. ''a'' on scrollsaw….
1-20 of 27 Results
Top