LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. WOODEN LETTERS

    Wooden letters : DABAR (BEAVER - on Croatian lang.) : 55×35x15mm - oak, beech, maple, ash, walnut - made for some boy scout company NOTHING ELSE…. : 100X67×12mm - oak, walnut - made for young couple I cut outside shapes on bandsaw and inner shapes on scrollsaw. Sanding on disc and belt...
  2. WOODEN LETTERS

    Three different orders : KUHINJA (kitchen) - oak, 18cm hight LUKA (the name) - walnut, 20cm hight 19 (house number) - ash, 15cm hight I cut all on bandsaw, finish wood oil.
  3. WOODEN LETTERS

    Various wooden letters for various purposes : Arrow - oak 50cm long, 2.5cm wide, 13mm thick - finish wood oil K, S, R - 50cm height, 10mm plywood - spray coloured and sealed with laquer PAVLE/date - walnut, 42mm height, 10mm thick - wood oil K - 20cm height, 4cm total glued plywood - finish...
  4. Bar sign

    18mm playwood sign, 50cm height, 260cm total lenght. Finish black spray paint. Fastened to back board with black ''dry wall'' screws (so they are invisible).Printed template cut on bandsaw. Another pleased customer.
  5. OAK LETTERS

    Oak letters cut on bandsaw and scrollsaw. 65mm high, 10mm thick, finish wood oil. ...ordered to make display sign.
  6. WOODEN NUMBER...LETTERS

    No 1 - two 18 mm plywood stripes glued to 36×36mm - 35cm tall number, finish pink spray laquer. Letter signs - 18mm plywood, 12×25cm, cut on bandsaw, finish wood oil.
  7. PINUS letters

    Pine letters, 30×20 and 20×20cm size, 28mm thick, no finish. Cut on bandsaw and sanded on oscillating spindle sander. The dot on ''I'' is stilized pinecone, carved with Proxxon electric carver. Customer will do the painting job.
  8. PLYWOOD LETTERS

    Birch plywood letters, dimensions 20×15x4cm, finish wood oil. Cut on bandsaw. Decorative purpose on newlyweds table.
  9. WOODEN LETTERS

    Croatian word HVALA is THANK YOU in english. Dimensions 17×13x4cm, poplar, no finish. I cut them on bandsaw, sanded on disc sander, belt sander and oscillating spindle sander….little hand sanding…
  10. TABLETOP SIGN

    18 mm birch plywood, 25×12 cm, 15mm ash base, finish wood oil, cut on bandsaw. ''L'' supported with 6mm dowel. ''a'' on scrollsaw….
  11. WOODEN LETTERS / NAMES

    Nika Dea Ena - ayous 15×23x3cm - wood primer, glossy white spray paint MARINERO BEACH BAR - oak, 15×10x1cm, wood oil ...lot of beltsander sanding… I cut all on bandsaw, except inner cuts, with scrollsaw.
1-11 of 11 Results
Top