LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 85 Results
  1. Military Shadow Box Table

    I made this table for my 1st Sergeant who retired after 29 years of military service in the USAF. Although this took a while to make, it was well worth the time and effort. It is made of red oak 1X material and oak ply finished with a few coats of minwax classic oak stain. This is a project I...
  2. Flower Planter for Mother's day

    I made this for my Mom, it's her Mother's day present. It's made from common lumber and Whitepine from Lowes. I cut all the parts out, then stained them with Rustoluem Kona stain. Then carved out the Welcome and Humming birds on my CNC. All the parts are fasten together with pocket screws...
  3. sweet corn holders

    Couldn't pitch the tiny little offcuts from previous cutting board posting. These took about 15 minutes, but my wife loves them. wenge, yellowheart and Martin Luther King black cherry. Inch and 3/8 brads with the heads clipped off. Brads were .062 dia , drilled a .050 pilot hole about 1/4 deep...
  4. "Kaleidoscope" carved wooden box (2018)

    "Kaleidoscope" hand carved basswood box. Box sizes: Outer sizes: length and width: 9,1 cm (3,58"), height: 6,1 cm (2,4"). Inner sizes: length and width: 7,3 cm (2,87"), height: 2 cm (0,79"). Finish: Danish oil, cotton fabric liner. The box in my Etsy shop. Thank you for looking!
  5. "Infinity" carved wooden box (2018)

    "Infinity" hand carved basswood box. Box sizes: Outer: length and width: 6 cm (2,36"), height: 5,3 cm (2,09"). Inner: length and width: 4,2 cm (1,65"), height: 2,3 cm (0,91"). Finish: Danish oil, linen fabric liner. ETSY INSTAGRAM FACEBOOK Thank you for looking!
  6. Elephant wall art

    Went to the zoo and had to cut some lines. Poplar wood is used for the elephant and a burned plywood background.
  7. "Warmth of Wood" carved wooden coaster (2018)

    "Warmth of Wood" hand carved wooden stand. Dimensions: Diameter: 12 cm (4,72"), thickness: 1,5 cm (0,59"). This natural basswood stand is carefully hand-carved by me. To protect the wood and increase its longevity, I apply Danish oil - a naturally derived finishing oil - to the completed...
  8. "Reflection on the water surface" carved wooden box (2018)

    "Reflection on the water surface" hand carved basswood box. Box sizes: Outer sizes: length: 14 cm (5,51"), width: 19 cm (3,54"), height: 6 cm (2,36"). Inner sizes: length: 12,3 cm (4,84"), width: 7,3 cm (2,87"), height: 1,9 cm (0,75"). Finish: Danish oil, linen fabric liner. The box in my...
  9. "Memories of the country you have never been to" carved wooden box (2018)

    "Memories of the country you have never been to" hand carved basswood box. Box sizes: Outer: length and width: 6 cm (2,36"), height: 5,3 cm (2,09"). Inner: length and width: 4,2 cm (1,65"), height: 2,3 cm (0,91"). Finish: Danish oil, cotton fabric liner. ETSY INSTAGRAM FACEBOOK Thank you...
  10. "A Moment Before Sunset" carved wooden stand (2018)

    "A Moment Before Sunset" hand carved wooden stand. Dimensions: Diameter: 12 cm (4,72"), thickness: 1,5 cm (0,59"). This natural basswood stand is carefully hand-carved by me. To protect the wood and increase its longevity, I apply Danish oil - a naturally derived finishing oil - to the...
  11. "The City of (My) Dreams" carved wooden box (2018)

    "The City of (My) Dreams" hand carved basswood box. Box sizes: Outer: Length: 17 cm (6,69"), width: 15 cm (5,91"), height: 6,5 cm (2,56"). Inner: Length: 15 cm (5,91"), width: 13,2 cm (5,2"), height: 2,5 cm (0,98"). Finish: Danish oil, cotton fabric liner. The box in my Etsy shop. Thank you...
  12. Go Fish

    The two carvings were made years apart, and tied together (literally) when I completed the "fly". The fly was designed when I felt the "rising trout(bass?)" carving looked too "alone"and small to make an interesting display. The links are brass rods. Admittedly the fish was from a carving book...
  13. Jewelry Box

    The first jewelry box I ever made. Milled palletwood, used box joints and chamfers. Handle from the local hardware store and felt from a fabric store.
  14. Wedding cake top

    Hello All! This is part of my "Blast from My not so Distant Past!" series found on my blog: http://blogspud.blogspot.com/2012/07/blast-from-my-not-so-distant-past.html Also featured on lumberjocks. Enjoy! My wedding cake table! This is one of my earliest creations using my newly bought...
  15. The Footstool

    This Project is on going and has taken on a life of it's own. What started out as a Christmas present several years ago, made out of shop scrapes and whatever was available.Simple joinery,square legs and a varnish finish. Evolved into this,The 2007edition,the 2008edition had ball and claw...
  16. "Infinity" carved wooden panel (2019)

    "Infinity" hand carved wooden panel. Panel sizes: Length and width: 20 cm (7,87"); Thickness: 2 cm (0,79"). The panel is carved from basswood. To protect the wood and increase its longevity, I apply Danish oil - a naturally derived finishing oil - to the completed wooden pannel, which gives...
  17. Mothers Day Gifts for the Grandmas

    This are mothers day gifts for the Grandmas in our family. Crafted from Teak purchased from #reusehawaii. I knew this wood would come in handy, not to mention Teak is around 26 bucks pbf. Each box contains 3 coasters in which I engrave a mother holding her child using #BobsCNC. I pleased...
  18. End Grain Cutting board

    This was a fun project my 10 year daughter and I did together, Our first end grain cutting board made out of hard maple and purpleheart
1-20 of 85 Results
Top