LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Building the Mattawa - a small tandem canoe

    I couldn't help myself. I had just finished building myself a basswood solo canoe and it got my girlfriend so excited that she wanted her own cedar strip canoe. We decided to build her a Mattawa which is a design by John Winters. I wrote about building it on my woodworking blog if you are...
  2. I think that grandpa would be proud

    Well after 4 months & some 200+ hours, my canoe is finished. What a project & learning experience. I enjoyed the challenge & that first paddle across the lake made it all worth it. For those that have followed the process bear with me. The hull is cedar with walnut & aspen accents. The aspen...
  3. 1 sheet canoe and sketches

    1 sheet of 1/4 " luan plywood , some spruce or p t pine 1×2s some fiberglass tape and some epoxy. i have buillt several of these for our grandkids. they enjoy paddling their own canoes on river trips. good little canoe for mellow rivers or small lakes.first plywood canoe i built was from the...
  4. Woodturning
    this is my first post so be kind! I inherited an old Delta woodturning lathe. I'm guessing it is at least 70 years old. I want to increase the swing of the lathe by machining riser blocks for the headstock and tail stock. The lathe bed is cast iron which sits on a "factory" supplied wood...
1-4 of 4 Results
Top