LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 112 Results
  1. Stained glass Air Force symbol gift

    Funny thing about working with stained glass after a long period of ignoring that hobby. You tend to bleed a lot. I found out a friend is leaving and fairly soon. So didn't have much time to build something intricate so had the idea of building a stained glass window for him. Initially the...
  2. Old Window TV Stand

    This is a project of a TV stand my wife wanted. I made the frame out of pine, and the top out of aromatic cedar. All mortise and tenon joinery. Then the wife distressed it.
  3. Window Seat and toybox

    This is a window seat I just finished this afternoon. I made it out of 3/4" birch plywood and painted it with oil base. The construction I used is to cut a rectangle lid, then essentially wrap it with 5" wide strips of plywood to give it an even look. The pieces on either side of the lid are...
  4. Replica Of The Old Window From The Far North, 11th century

    This is the replica of the old window from the far north, Republic of Carelia, 11th century. Pine, cedar. Beeswax, toning, von Einik family style. Also, selected this picture for this window - hand painted old picture, oil, canvas.
  5. Bay Window Seat

    As I have mentioned previously, our new house is a little short of space in the kitchen. In order to provide a space for items used less frequently, I got a request to build a window seat with storage under it. My better half decided on the dimensions and I got to work. The front of the...
  6. Transom Window Art

    This is some art I made of a sunset that goes up into a transom window above the front door. It was made out of maple and then dyed various shades using General Finishes Water Based Dyes and then finished with poly acrylic. Just a simple project that I thought I would share! Questions and...
  7. Sauna door

    Pre-hung cedar sauna door I was asked to make by someone I built the barnboard mantle for. I had free reign to design it however I liked and this is what I came up with. The window is two panes of glass. Thanks for looking.
  8. Record Player Stand

    When my niece announced she was getting married the ideas on what to get/make for a gift started to flow. I landed on building a custom record player stand when I saw that she had a record player on her registry. I built this one from a reclaimed wood framed window and some scraps of barn wood...
  9. Barn Window

    This is a window I made for a goat barn I'm building (check my blog for the whole saga). The window parts and wood were all free on Craiglist. The wood is mostly poplar, with beech molding for the window.
  10. Window Valances (home store moulding - no crown)

    Had this on the list for a long time. We took the window treatments down and painted over a year ago - finally got sick of the blank walls. These are simple valances that sit close to the window. The core of the box is just 8' trim boards and the moulding is wide door casing around the top and...
  11. Privacy Window

    I created a privacy window to place in front of a small casement window in our kitchen to prevent people from seeing inside our unit. I didn't want to use drapes, blinds, or anything else that could not be easily cleaned since this was in the kitchen. I started with one sheet of cast acrylic...
  12. The Studio

    If you have been following the story you will know that the deal was I could have a wood shop only if it was used to build a replacement garage and studio. (you are all familiar with that sort of conversation I am sure) Anyway the deal was done. We didn't do the concrete base or the metal...
  13. Exterior Sapele Door and Sidelites

    Massive project and massive job for this one, by far the largest project to exit my shop. This is a stave-core built door measuring 96"x42" and a pair of 21" sidelites all with riftsawn Sapele. The arch running across the top is a 160" radius arch with matching trim and of course jams. Every...
  14. Windo vallance

    My wife was after me for a shelf above the window for "stuff". She had seen a simple shelf at a friends house. Well, me being the one-upper that I am, I made her one with a shelf, sides, and molding. Needless to say, her friend was envious. This is a simple pine shelf with radius sides. I...
  15. Window shelf and curtain rod

    I built these 4 yrs ago when we moved into this house. We had some made for our previous house. We liked them very much because they gave a country feel to the home. They are made of pine and stained with what I believe is an oak stain. I made a hole through one side of the shelf so we can...
  16. window freshen up

    it was an old window. we cleaned it and made a fretwork around it. the fretwork was made from mulberry wood and then laser cut.
  17. Built-in Window Seat for my Daughter Brooke

    In our old house in Texas I wanted to build a window seat for my daughter Brooke in a bay window she had in her room. I built the window seat in the spring of 2010. The project is a mixture of birch plywood and pine. Lots of storage and at the time I was about 6' and 240lbs and I could fit in...
  18. Not quite Wood, but inspired by Lumberjock Dusty

    I grabbed a book and a starter kit from Delphi. and decided to try my hand. The only scary part is the grinding, so I'll probably make a contained grinding station with a nice big DC hookup in back. Requires some god lighting too. I haven't played with Lead Came for the border yet, but so...
  19. Classic Window Seat w/ Drawers

    Built in Window Seat for my Daughter Carcass - 3/4" MDO Ply Face Frame - 3/4" Poplar Drawers - 1/2" Baltic Birch Drawer Slides - 22" over extension Drawer Faces - 3/4" Poplar with Beaded Trim Window Seat Cushion - 4" foam covered with plush Fabric (made by local seamstress) Drawers were...
  20. Plantation Shutters

    I've been considering building plantation shutters for quite some time, mostly following the methods used by Norm on the New Yankee workshop. Seemed like a lot of trouble and work to make the jigs required. Then, I saw Rockler had developed all of the jigs and special hardware required. I was...
21-40 of 112 Results
Top