LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 112 Results
  1. Projects Awning window

    I made a window! I've never done anything like it, though I've done wood + glass when I made a Craftsman style lantern. I used heart rimu for the frame, and upcycled an old rimu bedframe for the sash. I planned for a simple rebate for the glass and a bead to keep it in place. I made...
  2. Barn window coffee table

    Simple coffee table using an old barn window. My wife designed it, and I built it. Tempered glass is on top and on the bottom shelf. Legs have a taper and are dadoed into the shelf below the top. The wood used is all reclaimed barn boards; maple, elm, and red oak.
  3. Delmar Caboose Restoration #1 - How-to and How-Not-to build a window.

    The Mason-Dixon Woodworkers Club was asked by the restoration committee in charge of restoring the Caboose built in 1929 on the old railroad property, to assist them in doing some of the restoration. They didn't have any funds so they were not only asking for assistance but for us paying for...
  4. Garden Gnome Fairy Balcony and window

    A customer wanted a balcony and windows to go with my gnome door and bridge. They also wanted a place to attach air plants. So I made these.
  5. Antique window frame mirror

    While perusing the projects section and particuarily Karson's Caboose window overhaul, I remembered a project that I built that you might find of interest. I accquired three 150 year old storm windows from a really old house nearby, while doing an overhaul for the owner. This house has seven...
  6. Dual Router Station

    Work Shop Update! Is any work shop truly complete without a dual router station? I used to think so until I started making cabinet doors, windows and entry doors. Struggling with moving from one set up to the next I thought it would be best to have a dual router station. The router on the...
  7. Craftsman-ish window casing

    We moved into our house about 2 years ago. The back den was a horribly cold and dark area which I used to house the lawn mower for the first few months we lived here. We decided to remodel the back den and hired a guy who gave us a really lowball offer. After about a month of incessant coffee...
  8. Antique Wooden Window Reproduction

    This is a antique window that I reproduced in spanish cedar for a customer.
  9. Sun Catcher

    This is a sun catcher I made as a gift last Christmas. I cut down an old window for a frame.
  10. Window Reproduction

    Window I built for a customer.
  11. Loft Beds, window seats, desk w/drawers

    I was commissioned back on November 7th 2017 to build furniture for a family. I just finished the install yesterday. I built 3 giant oak loft beds, 2 oak window seats, and an oak desk with a 3 drawer bank. Took forever but I have never seen a family as happy as they were! Made all them hours...
  12. Bay Window

    I made this window from scratch. Nothing was pre-made or bought (besides glass & hardware). We had a bad window unit in this hole and would have cost a fortune to replace so I went to work & built the basic structure & then covered it in pine & stained everything. I have kind of stayed away from...
  13. Delmar Caboose Restoration #2

    I posted a project on making two windows for the restoration of the Delmar Caboose. The restoration committee asked our Mason - Dixon Woodworkers Club to make some of the items needed for the restoration of the caboose. I volunteered to make the items. I posted the build of the windows Now we...
  14. Delmar Caboose Restoration #3

    I've posted two projects on making parts for the Delmar Caboose. The Mason Dixon Woodworking club was asked to assist in the restoration. I volunteered to make the parts needed. I've posted the making of the windows Then I needed to make a door. I am now making the siding for the caboose...
  15. Craftsman Window Casing Prototype

    In the June/July issue of Fine Homebuilding, the cover-story article was titled "Craftsman Casing - Simple elegance with site made trim". I loved the look of it, and my wife did too, so when we bought our house last year and I did some large-scale renovations, I took off all the existing...
  16. Dining room piano windows

    These are two piano windows from my dining room. Last summer I had the exterior windows replaced while I was getting new stucco on my house, and I thought that I should clean up the interior windows too. I started by stripping the majority of the paint off the windows and inspecting them...
  17. Boat Windshield

    Boat windows - where to start; this was the main hurdle I had to overcome. I knew this was going to be a challenge for me, and it ultimately was. When I went to visit Marc D. in Kansas; he told me to pick projects that were a challenge for me. This was his no.6 piece of advice for buddy...
  18. Window Trim

    I redid the horrible window trim in my bedroom and bathroom while insulating (w/ spray expanding foam) some large gaps around the windows (the gaps can be seen in the last picture). I used pine moulding and cheap pine ply from the local Home Depot, so nothing fancy material-wise. The large...
  19. Bay Window Seat | Custom

    This is a window seat that was completed in September 2005. It was built for a bay window at our Mayor's house. It is built from mostly MDF. The cover was picked out by the customer and I upholstered it myself by a simple fold and staple technique. For more building pictures see my Current...
  20. Board and Batten Shutters

    Just completed making 15 sets of cedar shutters (a whole lot of different sizes) for a relative. These were made in a board and batten style. The vertical boards are held with pocket hole screws and the horizontals are held with short deck screws from the back. I chamfered the edges of the...
1-20 of 112 Results
Top