LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 62 Results
  1. Vanity & Mirrors

    The two ends of the vanity are out of Walnut. It was bleached and stained and then glazed, each unit had a pull out tray in the bottom. The center pedestal is out of Zebrawood veneers. The door and the drawer are on touch latch's that's why there is no pulls. It also has one pull out tray behind...
  2. Veneering Seminar Postponed to May 2 and 3

    All of the information previously posted still holds. The only change are the dates. This does give any of you interested, more time to make arrangements.
  3. Cock fighting chair

    This is a repoduction of an old cock fighting chair. I made three of these for a client. They are made out Walnut and poplar. Its a chair they originally made to watch cock fights way back when. You sit in them backwards and the wings on the top become the arm rests. Thanks for looking.
  4. Vanity & Mirror

    There was two of these made for the same bath on opposite sides of the room facing each other. The vanity is out of alder with a rubbed through paint. The legs are hand turned with maple dovetailed drawer box's. The mirror frames are out of walnut and silver leafed. The frame was made using a...
  5. Wooden Napkin / re-visited

    This was one of the first projects I posted at Lumberjocks. At that time I only had one picture of the thing. I recently contacted the gentleman that bought it at a fund rasing auction for the local art museum six years ago. He purchased it for $800.00 at the auction. He was kind enough to let...
  6. Kitchen

    We did this kitchen a couple of years ago. This is the first project we've ever done I think that had more finish hours than it had build hours. The cabinets were all painted and then motlled with glaze. Black accent paint was then added and finally copper and silver leaf was applied, then the...
  7. Plasma TV Cabinet

    This piece is made out of Alder. The upper cabinet has bi-folding pocketing doors so they don't interfear with viewing the tv from any where in the room. It has a multi step finish consisting of dye stains and glazes. Hand done french corner posts with hand carved French feet. Myself and LJ...
  8. Granddaughters Crib

    Addison Rose of Texas finally has her crib! Its a couple of months late, but she has forgiven me. Thanks once again thanks to all those that followed along with this very specail journey, its been fun! One big Hug and Thank-you to my Daughter and Son-in-Law for their love and patients...
  9. 2nd Floor Study Carvings

    Well these are the last two for this house, Finally! They are once again out of Quarter Sawn White Oak. They measure 58" long x 1/4" at one end to 5 1/2" at the other. These were re-sawn scrolled out and then applied. All the relief work on the back was done prior to re-appling them. Taking...
  10. Walnut Ring Chest

    40" wide x 24" deep x 42' tall Walnut dye stained and top coated. They back ground of the drawer fronts is gold leaf. Walnut drawer box's with blumotion touch undermount slides. No pulls, give'm touch and they slide open on thier own. Granite top. Thanks for looking and have fun woodworking!
  11. Laundry Rm Folding Table

    The size of the table is 28" wide x 68" long x 36" tall. The base is made out of Alder with two hard maple dovetailed drawers on blumotiom soft close undermount slides. The top is made out of Hickory and is hand planed and distressed, there are hand turned Hickory pulls on the drawers. The legs...
  12. Zebrawood bow front vanity

    This is a bow front vanity I built this past summer. It sets in a small guest bathroom. Its all Zebrawood veneers and Wenge hardwoods. Dovetailed maple drawer box's with blumotion undermount slides. Concealed blum hinges with blumotion softclose devices.
  13. Zebrawood Bar Cabinets

    This bar is just outside the guest bedroom. Its all Zebrawood veneers again and Wenge hardwoods. The interiors are UV Maple ply with Hard Maple dovetailed drawers again and blumotion undermount slides. Concealed blum hinges with blumotion soft close devices. The finish is just clear laquer. The...
  14. Custom Knife (STOLEN ITEM); Frontier Bowie with Elk Naturally Shed Antler Handle

    This knife has been "STOLEN", I'm sorry to say that this knife was shop-lifted from Gallery XII in Wichita, KS some time in the past couple of weeks, most likely on Friday 8-29-2008. I guess I should consider it a compliment that someone would be willing to commit a crime to get the knife...
  15. Bench Top Bench

    This bench started out as just a 2×12 and a 2×4. Then I decided it needed to be made out of something a little harder. I finally rounded up some white oak to make it out of. Somewhere in the process I decided to dovetail all the joints and champher all the edges. The tall vice was in Shopnotes...
  16. Baseball Bat Bed

    This is a full size bed made for my Grandson Knox. Its made out of walnut with used wooden baseball bats of various lenghts. Small bases were made to put on top of the footboard posts with baseballs on top of the head board posts. The walnut was bleached then dye stained and glazed. All the...
  17. Maple Newel Posts

    Custom hand turned solid hard maple newel posts. They are 9 1/4" diameter x 48" tall Thanks for looking!
  18. Barley Twist Newel Posts

    These open barley twist posts are made from alder, They are 7 1/2" square. I've made about 12 or 14 of these so far for a local contractor. Done on a Legacy Ornamental Mill. Thanks for looking!
  19. Barley Twist Cabinets

    Here's a couple of cabinets with barley twist front legs. They are 40" wide x 20" deep x 36" tall. The door panels have 1/2" raised diamond panels. Each with one drawer mounted on blumotion softclose undermount slides. They are built out of alder and die stained and glazed with a top coat of...
  20. Library Cabinet

    This is a cabinet for the local Sunflower Woodworkers Guild to house some of the guilds library. It was made on Saturdays with a number of the guilds members coming over to help with the build. Around 15 or so members helped in all. This is a memorial for a member that is no longer with us...
1-20 of 62 Results
Top