LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 29 Results
  1. Blanket Chest

    I really liked the project posted by Jeremy http://lumberjocks.com/projects/22544 (jjraybu) and have had it in my favourites for quite a while. My version is made of Walnut, Birch plywood and cedar for the bottom. The finish is gloss wipe on poly (no finish on the cedar) and I used Lee Valley...
  2. Baron Fountain Pens

    This Baron fountain pen was made for my dad as a wedding gift in my wedding and consists of: Chrome plating Spalted Maple wood Sealed & Polished finish I know that the photo is not the greatest (I'm still learning how to take a picture of an inanimate object), but at least you get the idea. I...
  3. Engagement and Wedding gift

    This is an enhancement and addition to the "Friends" sign. I had the 2 messages connect and be one as with the marriage of two friends. It took a bit of detailing to get the pieces to match perfectly.
  4. Wedding wine box 5/6/17

    My mom asked me to make a wine box for a wedding she and my dad were going to, and this is the result. The box is Made from walnut and maple plywood using rabbet and dado construction. The lid was laser engraved on top and bottom, and the front rings were carved out using my Shark CNC mill. I...
  5. Serving tray

    This serving tray I made from one piece of walnut wood, without gluing or merging. This is my wedding gift to Marianne, my cousin. Dimensions are: 42×27x4,5 cm (16.54"x10.63"x1.77") The finishing is tung oil and wax.
  6. Duet Music Stand

    I made this stand as a wedding gift for a precious couple who are both musicians. Materials are walnut and hickory, finished with Danish oil. Modeled after some antiques I saw online. I think I used every tool in my shop during the process, from milling to details to final assembly. First time...
  7. Wine Bottle Gift Box

    Created this box as a Christmas gift back in 2017. This was one of my first boxes around the time I started doing woodworking. This is now on my Etsy shop for those interested.
  8. Wedding Gift

    From Left to Right - Wedding Invitation, Carving of Rings and New Last Name and their Engagement Photo.
  9. Wedding Gift

    A Wedding gift for the new couple.
  10. Third Times a Charm Wine Goblet with Captive Rings with ring cutting tool.

    I wanted to make a special wedding gift for my niece in the way of a double captive ring wine goblet. First try using pear the goblet survived, needless to say, the rings did not. Second attempt neither one survived. Third attempt using yew surpassed my expectations. This photo is just the raw...
  11. Birdseye maple and walnut wedding photo box

    This box was made as a wedding gift for my niece and her husband. The box is approximately 8" high by 13½" deep by 12¼" wide. The main body is made from birdseye maple. The bass top is wood-burned and colored with pencils, then bordered with walnut. The miter keys and dust lip are walnut. The...
  12. Another Wedding Wine Box

    So my friends Steve and Kathryn are getting married this summer, and I really enjoy producing wine boxes as gifts. there is actually a whole ceremony in some weddings devoted to writing letters and sealing the box, etc., but I normally like to just put in a nice bottle of bubbly and a couple...
  13. Wedding Photo Album Case (Gift)

    We have a nephew getting married this weekend (April 18th) and I wanted to give them a gift that would capture the essence of this special and precious day. We bought them a Lennox wedding photo album and I built a keepsake box to store and protect their album & photos. The top and bottom of...
  14. "Vintage" Last Name Glass Frame

    This is a wedding gift for my buddy, inspired by a post I saw from GlassImpressions not too long ago (http://lumberjocks.com/projects/132513). This was my first time cutting coves on a table saw, and although slightly terrifying at first, its really not that bad. Other than lots of math, I'm...
  15. Wedding Wine Box

    Another wine box for a friend's wedding coming up soon. After the Frame debouchel (shattering a large pane of glass), I decided to stay away from glass and stick with what I know best. The box is made of Oak with a plywood top, made with basic rabbet and dado construction. I have been gluing...
  16. Woven Panel Hope Chest - FWW Article Piece

    Hello Lumberjocks, Here is my latest project that has been under wraps for a while. It is the piece featured in my FWW article this month. 4 Ways to Make a Panel Pop Now that it is published I am posting a quick description and some pictures of the project. This hope chest is a wedding...
  17. Simple wedding shower gift made with the wife

    My wife wanted a gift for her friends wedding shower that was not store bought so this is what we did. The name blocks are 2×4 cut into 2 sizes sanded and painted. Then she applied scrap book paper and I cut vinyl letters and put them on that. The box is as simple wood constructed back...
  18. Wedding Gift - Wine Box

    I had an old friend (over 30 years) get remarried this past weekend & I decided to try my first slide top box for a gift. I had a scraggly piece of red oak on my wood rack that I decided to machine & was very pleased to see that it had quite a bit of rays exposed in it (the last photo shows it...
  19. Cherry Serving Tray with Purpleheart Splines

    This is a cherry serving tray with purpleheart splines I made for a friend as a wedding gift. It turned out much better than I though it would. I had no plans and just kind of started building (not really the best way but it makes me learn). This went together pretty smoothly. I only had 2 minor...
  20. walnut/maple inlay picture wedding gift

    a wedding gift for my wives bestfriend, a borrowed design from David Picciuto (drunkenwoodworker). Also made the fine woodworking picture frame jig and spline jig. had a lot of fun, learned some new stuff
1-20 of 29 Results
Top