Search Results for ‘water based’

My adult daughter's life revolves around "The Walking Dead" and zombies. Her whole house is decorated with a zombies-inspired theme. She asked me to build a coffin bookcase for her birthday. This is the finished project, made from pine with a clear polyurethane finish.

Born Again BC Rich Warlock neck. Cut this out of white mahogany "primavera". Modified the head to have horns.

I make 4-8 of these a month. Various color and woods. This one has an antique white over medium gray distressed base with a solid ash top. Top is finished with 1 coat of emtech sealer and 3 coats of emtech 6000. The base has 2 coats of 6000 over the paint. Credenza and bench to match. The chairs...

You can watch the Youtube Video of the build here In this video I designed and crafted a Miesian box inspired Bluetooth speaker. This piece combines the timelessness of woodworking and design with modern Bluetooth speaker technology. The design of this piece takes its aesthetic cues from the...

Mid Century Modern inspired, this End Table is made from one solid piece of 6/4 Ash (17" wide) and features a "waterfall grain pattern" where the grain 'flows' over the edges. The leg set is made from Walnut and is built to last. At 24"wide x 17" deep x 20" not only does this make a perfect...

This is my first official completed woodworking project as a "serious woodworker". I've got a lot to learn but I sure absorbed a lot of information during the process of building this bookshelf. I started out with a design that would properly fit the removable bins that you see pictured...

I built this toy box as a gift to my mom for Christmas from her grandchildren. She had been telling me she wanted a toybox for all of the kids toys she keeps at her house for them to play with, so I figured it would make a good gift. I started out with the plan to make a pretty plain box, but...

Here are a few pictures of the Andre Roubo inspired French workbench I recently completed. It is strongly based on the plan from Christopher Schwarz's Workbench book and Jameel Abraham's bench. It's about 7' 5" long, 34" high, 24" deep and it probably weighs around 350 lbs. The top is 4"...

Flag case, sides made of 15mm oak, 3mm plywood back, overal dimensions 40×40cm, finish wood oil, base 40mm thick, 3mm glass. Splines were made of wenge.

A little something I was requested to make for my cousin as her pup is getting older and she wanted a small box to keep things in so when she is gone… The box it's self was machined from walnut. The bottom hollowed out and flocked with a Navy blue flocking material. The top just a thin piece...

Following up my last two band saw boxes I made this piece. The third in a set of set of three, a piece build in hazel, Mahogany and Pine wood, using a combination of band saw and carving techniques. It measures 12X8X4 inches and it was finished with polishing wax.

This is a "Greek Style" column, 11" dia. x 8 ft. with a 9" center shaft. Made of 8 poplar staves per each of 3 seperate sections. 45 degree "birds-mouth" cut on one side of each stave and 90 degree flat edge on the other side. This allows the shaft to self-align as its being pulled together in...

Cutting board measures 2"x14"x24" from walnut & cherry, juice groove & finger grabs. Fun project Thanks for looking!

Modern Coffee Table The Preliminary Idea: I saw on some website (the way all great ideas and projects start, right?) that it's possible with water-based stain to emulate the look of walnut with Poplar. While I've read way too much woodworking snobbery about how this is blasphemy, and 'why...