Search Results for ‘wardrobe’

The is a Murphy Wall Bed that was completed in May 2009. It is the Bullock style murphy bed with raised panel doors as the face panel. This one was built at a 20" depth instead of the normal 16". This allowed a 5" flip up shelf to be added in the headboard. It also allowed me to cope around...

Here is a wardrobe (I can't spell armoi…whatever) I made for my wife. Started around mid November and finished on March 12. First I built the carcase, then the drawer skeleton, then the drawers, then a shelf and put all of that together in our bedroom befor starting on the doors. Except for...

Made this for my Granddaughters. made from birch plywood and poplar for the stiles. Used 1/4 plywood for the sides and steamed it so it would bend.

One of my high school projects. The beer bottle collection, well, that's a college project.

This is actually the second "Teenager's Dream" project I did; I'll get the other one posted eventually. Mom sketched up the initial concept for her daughter's room. The challenge was adding more closet space while the actual closet was being closed and stolen to expand mom's closet. The first...

Couple years ago we were hired to build a Boulle cabinet for a client in New York who wanted a murphy bed for his office. The project started with a all Armoire, before they changed there mind and decided to go for just the door on a black cabinet. The Armoire project had a marquetry layout...

These built-ins were built for friends. After measuring I had no time to build the unit for a few months. When it was completed, I went to have dinner and then install them. While we were having dinner they asked about the price of the units. I gave them a price of about $3200.00 with free...

A nice simple project and went together wonderfully easily. Plywood carcass pocket holed together to allow assembly onsite. White oak face frame. And two oak frame sliding doors.

I made this for one local village park. It's made of old two door wardrobe. I cut it in half, joined sides, transfered two legs, cut remain doors with jigsaw and stapled metal grid, made shelves from remain pieces and leftovers. Roof was made for planting grass and flowers. Double layer of nylon...

Wife asked if I could make wardrobes for the bedroom based on something from ikea. Sheet goods from bunnings came to about $350, hardware was another $100ish so saved about $400 compared to the ikea cost but these are much sturdier, 3 individual cabinet at about 600mm wide and full sheet high...

Relief carving of roses on a piece of one inch basswood. I have yet to complete the finish on the piece. Once I have it finished, I will install the clockworks. Interestingly enough, I did most of this piece with a flat head screw driver that I filed into a small scoop chisel/carving tool. I...

I design this project to Comovar (a company here in Portugal). This wardrobe is 16mm thick, 0.58 m deep and has shelves and partitions. It has three boxes. One of them with 1mt and the other two with 0,50cm, 16mm. There are two drawers with 1mt. It comes in other colors too: grey and black and...

My little girl's 8th birthday was coming up…so down to the shop I go. She had recently received an American Girl doll from us as an early birthday present, so I thought a little bed for "Elizabeth" was in order. My wife said make it a trundle bed…so, knowing better, I obliged. It's about 18"...

Completed December 1990. This cherry wardrobe is inspired by some pieces I saw featured in Fine Woodworking. Interior parts and drawer sides are of poplar. All drawers are half-blind dovetailed with a Leigh dovetail jig. The interior drawer frames are assembles with mortise and tenon joints...

Here is a wardrobe I made for a priest to store his vestments and sacramentals in. It is made out of birch plywood and maple fo the drawer coversand baseboard. I do not have a final finished picture yet but I will put that up when I get it. I had to deliver this to VA from upstate NY. My dad...

I created a simple router table that attached to my work bench - I've never used a router before. Unfortunately, it worked better in theory than in practice. When I went to use the router, I placed a scrap board on it, and as I moved the board, the whole table shifted. Not good! I decided to...

This is a wall unit completed on December 21, 2007. It is part of a complete bedroom set that I built for this customer consisting of this wall, a bed, and two end tables. I will write about the rest at a later date. Features 46" flat panel television and accessories in center section...

I've been tossing around this mesh idea since my bed build It was an accident. Really. I just oversized the rough width of the bed slats too much and I ended up sawing off 1/16" of them. I liked these thin strips so much that I played with'em. Mostly bending and weaving. And I even brought it...

Sometimes you just don't have room for a pair of balanced bookcases. This project only had one. The bookcase had some changes from my normal design. First you'll notice that it is deeper then the bed. Normally my bookcases are flush or set back a few inches. This customer wanted a standard...

I wanted to do something really grand for my wife on our 20th anniversery. I know it would be a woodworking effort, but didn't know what. A glance around the bedroom proved her need for a really big jewelry chest, but I didn't want to make just a plain old box! So one day she shows me a picture...