Search Results for ‘wall mounted’

My first attempt at dovetails. I made this out of quartersawn oak with handcut dovetails. The finish is Old Masters dark walnut stain, and Old Masters oil-based brushing lacquer colored with a little 'amber-honey' Transtint dye.

Hi all, Have not posted for a while but I have been watching you all. Nice stuff. Have been making projects for the fall craft sales at a fevered pitch. Think I have enough inventory. Don,t know why I do them but I guess it is for the fun of meeting people and clearing my shelves so I can make...

This is the new addition in my small workshop (12'X12') I built this wall to wall (12' long) table, entirely wall mounted, without occupying any floor space. it is in two sections of 5' each supported by three wall brackets. Wall brackets are made of 2×4, into L shaped bracket and is...

I made this for a friend of mine as a surprise going away gift. It's 12 1/2" X 11" and made completely from 1 pallet. Most of it is Maple, except the face, which I wasnt able to identify. It is the first I've made of this kind and there is a lot I will do differently for future builds. But it...

I have found that it's best for me to have NOTHING stored on the countertop in my RV, so wall storage is king. This shelf-thing is made of some scraps of maple and white oak I had on hand. The maple box has a slatted bottom, making it suitable for keeping vegetables etc. that need airflow...

A simple wall mounted coat rack design consisting of various depths and widths of walnut. I wanted a clean simple design but also one that had some visual interest. Overall width is 40 inches with staggered 10 inch verticals. Project was finished with seal coat shellac. Comments, questions, and...

I had a bunch of 5/16×2" red oak flooring material leftover from some panel cladding I'm doing at a commercial job so I decided to make a little herringbone coat rack for my daughter who is two to hang her little coats on. I glued the planks to a piece of plywood with some bosticks best floor...

Continuing my tradition of building with a "function over form" philosophy, this is hardly an example of fine woodworking. Nonetheless, I am fairly happy with the way it turned out, as it solves a problem I had in my shop-sorely needed storage space for my hand tools. This cabinet is built...

I needed a place to hang my coats by the front door so they would be handy and make life easier when running out the door. Wood is Black Walnut with Nickel plated hangers. The walnut has some interesting grain that I like. Finish was 2 coats of polyurethane. I didn't want buttons, plugs or...

These walnut shelf units were for a customer who wanted to display sports memorbilia in his home. I came up with these open back, wall-mounted adjustable shelf units. Material is all solid walnut, air dried in my shop. Finish is several coats of oil/poly rubbed finish over a shellac base coat.

A wall-mounted bottle opener I made for my brother's birthday. Zebrawood with walnut inlay. I used a fellow LJ's idea for the removable bottom, think it turned out pretty nice. "Drink Wisconsinbly" opener since his wife is from and they take a lot of trips there. Thanks for looking.

Maple and Walnut Wall Mounted Coat Rack Used some leftover Maple tongue and groove floor for the vertical backing (this is mounted with glue on 1 inch plywood). Mitered in Walnut stock at 45 degree angles for the hooks to hang coats and garments on. Border is also Walnut. First posting here...

I finished this a while ago but I figured I should post it. It is a wall mounted walnut wine rack with an oil and wax finish. I regret the wineglass holders, but other than that I think the design is pretty good.

So now that I have built my wall mounted panel I can start with the projects that I can store my various clamps onto it.. First up is my F Style Bar Clamp: It's basically a L frame .. The top shelf is 4.5" deep by 24" long.. I start by ripping a 3/4" plywood panel 2. I used my brand new dado...

I invested in some 40" Bessey Clamps and they were still in the box because I had no where to put them .. I don't imagine me owning too many of these clamps as they are so exspensive but what I do own (2 right now ) I want to take really good care of these. So I built this little unit to...