LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 111 Results
  1. Side table

    Rebellion Fabrication is the work I work at. It is made of Red Oak with a finishing making it pop with color. Standing at 2 feet tall, fifteen and a half by fifteen and a half. I used a CNC table to make the top. It's held together with glue and screws making it able to hold almost 200 pounds.
  2. TV Stand

    This is my 60 inch long by 18 inch wide tv stand. I made it 18 inches wide so it can hold my 42 inch TV and my Xbox One with comfort. It stands at 24 inches because that's the perfect height where the TV looks amazing and is made out of hickory. I'm not done yet, because I need to put a piece of...
  3. Woods 1 Step Stool

    step stool one of my projects in woods 1 this semester dimensions are 16×9x8 engraved my name and graduation year on the top with a cnc router cut half circles in the legs 1/4 round over bit on the edges of the top put it together with pocket hole joints put 3 coats of tung oil finish on it it...
  4. Step stool

    I used cedar to make my step stool I used the c and c router to carve my name into the top and I'm going to use it as decoration
  5. My step stool

    I made this stool which was an amazing experience for me because I'm a beginner and thanks to my teacher Mr.Herrera it was also an amazing experience for me and my classmates:)
  6. StepStool

    Made in Wahoo, Nebraska I used Cedar Deck Wood Pocket hole joints Painted the words Used CNC Router for top Used Rounder bit for top/legs Finished with Tung Oil, 3 coats Theres a cat in the picture because the C letter for my name is a cat so I thought it would be funny to have my cat on it.
  7. Stepstool

    Made-Wahoo Public Schools Material- Cedar Methods- Pocket Hole Joints, Used CNC router for top, Used round-over bit for top/legs Finish- Tung oil, 3 coats
  8. Stepstool

    Made in the wood shop of Wahoo Public Schools Made from a 5/4*8 Cedar Deck Board Used Pocket hole joints, CNC router for top, rounder bit for top/legs Finished with 3 layers of tung oil
  9. Stepstool

    This project was made in the Wahoo High School woodshop. It was made with a 5/4×8' cedar deck board. It is held together with pocket hole joints. I used a CNC router for the designs on the top and sides, and red airbrush paint was used to color the designs. I used a round-over bit for the top...
  10. STEPSTOOL

    Wahoo high School Woods class 5/4×8' Cedar Deck Board Pocket hole Joints CNC router for engraving on top Used round over but for top and legs Tung oil three coats
  11. Stepstool

    Wahoo High School Woods Shop 5/4×8' Cedar Deck Board Pocket Hole Joints CNC Router for Engraving Top Roundover Bit for The Top/Legs
  12. Stepstool

    The project I made was made in my woods class. It is made of 5/4×8' cedar deck board. It was made by using pocket hole joints. We used a CNC router for the top and a round-over bit for the top and legs. I used 3 coats of tung oil.
  13. Stepstool

    Wahoo Public Schools 5/4 X 8' Cedar deck board Pockethole joints Used CNC router for the top Used roundover bit for top/legs Tung oil, 3 coats
  14. Stepstool

    - Made at Wahoo High School - material is 5/4×8' cedar deck board - pocket-hole joints - used CNC router for top to engrave my niece and nephews names, the colored them with blue and pink colored pencils used rounder bit for the top and legs
  15. stepstool

    Made in Wahoo, NE It was made with 5/4×8' Cedar Deck Board methods used pocket hole joints, used cnc router for top and used roundover bit for top/legs
  16. stepstool

    it was made in wahoo in Nebraska. It was made with 5/4×8' Cedar Deck Board methods used pocket hole joints, used cnc router for top and used round over bit for top/legs
  17. stepstool

    It was made in Wahoo Nebraska It was made from a 5/4×8' Cedar Deck Board I used Pocket hole joints, CNC Router for top, and Round over bit for top/legs I used a Tung Oil, 3 coats finish
  18. Step stool

    It was made in wahoo public high school wood shop 5/4×8 cedar deck board Methods - pocket hope joints, cnc routing, round over bit for top and legs Finish - tung oil, 3 coats top, 2 coats sides
  19. stepstool

    made in wahoo Nebraska with 5/5×8 cedar deck board methhods used pocket hole joints,used cnc router for top and used rounder bit for top/legs
  20. Stepstool

    Where is was made: wahoo public wood shop 5/4×8 cedar deck broad Methods: pocket hole joint, cnc router for top, roundover bit for top/legs Finish: Tung oil, 3 coats
1-20 of 111 Results
Top