Search Results for ‘valet box’

This box features a solid Zebrawood body trimmed in a Wenge accents, splined miter joints for enhanced stability and a solid Wenge top. The top of this box lifts to reveal storage for eight watches. Underneath the top watch compartment a sliding drawer provides open storage which can be lined...

So make a box, make a really really good box. Use the best woods you can find, exotic woods, expensive woods. It will take every scrap of the boards you bought to make the box. No mistakes. If you screw up a cut you will not be able to find another board that will match and you can not sell...

Another new box and creation, I really enjoyed making this one and took this bandsaw box to a new level with a valet box in mind, this box has 4 drawers with one hidden in the cab and a top open tray, my first box had a drawer pull where the ladder is this time ladder is just for show, I used...

Another new creation a mens valet bandsaw box I made this box out of spalted hackberry it has 2 drawers with one hidden making it three and a top tray. Thanks for viewing :)

This was my first actual attemp at a bandsaw valet box, in order to hide edge and end grain of the red oak, I laminated walnut and Brown Maple to the outer surfaces, the drawer fronts are brown maple with walnut drawer pulls, it is finished with General Finishes Arm-R-Seal Gloss. Thanks for...

Pictured: Men's valet box, this box is made from Walnut and Pecan, I wasn't sure how the combination would turn out when I matched these two woods together, doesn't seem as though I got the contrast I was really wanting as it seems they blend in to much, I'll chalk it up as a learning...

Once again I combined bandsaw box made from Alder with traditional mitered corners cut from my miter saw from Walnut and warped the bandsaw box creating a hybrid box. With Andy's and Big Al's help and advise I was able to create a wood grain flow on this box along with a way of a key for opening...

This is a men's valet box, but more so a design experiment. I am playing around with different styles and techniques. This is No.2 in the series. No.3 will be the inverse (walnut carcass, curly maple everywhere else). No.4 will be a desk. Materials Ash case, all splines are also Ash Beech...

After my dad seeing my latest two valet boxes he requested this one without drawers just a tray for his up coming 80th birthday to drop things in, this three tray design, I made out of Spalted hackberry and Alder, it measures 12" x 2" x 6" the two outer trays are 1/2" deeper then the center tray.

I was commissioned to build this custom valet box for a customer, she specified it was for her 9 year old nephew's first Holy Communion and wanted his initials and a cross so I came up with what you see here, the box is a two part box, the bottom part where the drawer is was done on the bandsaw...

Shown are three boxes, all with open ports on the back for charging cords to pass through, the first box is made from Texas Cedar Elm with Walnut used for the wooden hinges, splines and the lid, the second is Zebra also using Walnut for the hinges, the splines and the lid, the third is Cherry...

This is made from solid red oak and red oak veneered panels. To get the ebonized effect, I used India ink. Then top coated in satin lacquer. I used the satin nickel Vertex stop hinges from Rockler's. The nickel plated copper engraving was purchased from a maker on Amazon. The watch pillows were...

Another creation and design I just can't help myself ideas just keep coming and they won't stop :) This box can be used as a duel purpose either for valet or a desktop box, I handcrafted out of Red Cedar it has one large devided drawer in which both the center tray on both top and drawer are 4"...

Another mens valet box, I made this bandsaw box using Zebra and Walnut it has two large drawers with seperated trays on top. Measurement are 12" W x 3" H x 6 3/4 D

Gone

Men's valet Chest, (Box) made from Spalted Hackberry, my own creation, I got this wood while it was still green and white from a customers property, once I got it home, I put several of the logs in my spalting pit where I nursed it for a 2 year period to get the results you see here. It has very...

Pictured are two which I refer to as Hybrids these are my own design in which I've combined bandsaw box with Mitered splined joinery, the inner part of the box is a bandsaw box and the outter is mitered, these are open top men's valet boxes with drawers, both have two hidden compartments, false...

Men's Valet Box, one of my hybrid boxes where mitered joints and bandsaw box come together this is a lidless box with two open trays on top and two lift out trays, two very large drawers, a hidden drawer, a very large secret compartment with a false bottom door located on top of the box under...

Pictured Men's Valet Box with a phone charging cable port located in the read of the box, this is another new design I have included into my boxes as I've had customers ask if I have phone charging capability, this seems to be a popular trend these days. The wood I used in the project is a wood...

This box starts off with a glue up block made up of Alder, the wrapped with Mesquite, I used Wenge for the splines, drawer pulls and top tray, it has all of my special features hidden drawer and the hidden compartment behind a false bottom door, this mesquite used in this project is part of some...