LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 44 Results
  1. Hepplewhite One Drawer Stand

    See more on my WordPress Blog Follow the build below: Hepplewhite Stand #1: What's Wrong With This Picture Hepplewhite Stand #2: First Things First Hepplewhite Stand #3: Lay-Out & Rough-Cut Hepplewhite Stand #4: A Proper Edge Hepplewhite Stand #5: Mortises - Finally! Hepplewhite Stand #6...
  2. Spills

    I guess technically this is a project … after all it is made of wood! Having recently completed my spill plane ... I've been enjoying the creation of spills … lots of spills! Last week at church we had a multigenerational Advent Wreath making session. So, I thought I would place this project on...
  3. Roubo Workbench (Hand tools Only)

    In my attempt to move over to a hand tool lifestyle, I decided to upgrade my workbench to a Roubo, since they are all the rage. This is Roy Underhill's version. I don't have his book, so I had to redesign it to fit what I remember it as, keeping his basic vision as a base to work off of. I biult...
  4. Spring Pole Lathe

    See more on my WordPress blog
  5. Scrap Oak Scrub Plane (Hand tools only)

    I am not a plane maker. This was my first venture into the land of plane making. And since I am trying to migrate over to using hand tools only, I made this with only hand tools. I needed a scrub plane that would do what I needed, the one I had before really bit the cheese for some reason. So I...
  6. Japanese Stool (Hand Tools Only)

    I built this Japanese stool for someone, and wanted to use only hand tools. The stool has 12 mortise and tenon joints, and is glued together. The lumber is recyled from an area construction site. The top was shaped using tons of saw kerfs as stop cuts along the top to the desired depth of the...
  7. William & Mary Prie Dieu

    William & Mary Prie Dieu for the Director of the Julian of Norwich Center, Episcopal Diocese of Atlanta. Built of gummy cherry, mahogany, and alder. Finished with boiled linseed oil, lots of sun, shellac, and beeswax. Polished with rotten stone, linen, and turpentine. 100% unplugged, 225+ hours...
  8. Stool Of Elm

    I want to try making chairs in the future, so I thought making a stool would be a good place to start. The wood is Elm that I got from the MSU surplus store. I believe it came from a tree on the MSU campus, and was milled and dried by the forestry department. The two boards I used in the...
  9. Wooden Saw Vise

    See more on my WordPress blog ... thanks!
  10. Lamb's Tongue Gauge

    Lamb's Tongue Gauge - While working in the shop today, I decided to add a chamfer/lamb's tongue detail to my Reformation Era Prie Dieu, along the sides. A lark's tongue is a simple scoop from the arris to the face of the chamfer, as see along the stiles and rails around the...
  11. Japanese Inspired Monitor Stand

    This is a monitor stand I made to hold two 21" monitors. The height of the monitors I use at work was too low and I needed something to raise them up a bit. There was a piece of rough sawn ash that had been sitting around my shop for awhile which I thought would work well for it. Both the top...
  12. Eighteenth-Century Frame Saw

    See more on my WordPress blog Follow my progress with the links below. Eighteenth-Century Frame Saw #1: The Want Eighteenth-Century Frame Saw #2: Handles Eighteenth-Century Frame Saw #3: Cart Before the Horse Eighteenth-Century Frame Saw #4: Side Rails and a Test Drive
  13. Kerfing Plane

    Another kerfing "plane" from Tom Fidgen's "The Unplugged Woodshop". Teak, with a beeswax+BLO finish. Hardware from Badaxe. I've a big project coming up for herself in the fall and will need to resaw some cherry. Am hoping this helps. The teak is heavy, but fits my hands nicely. A trial on...
  14. I am a Meditation Stool Machine

    I was looking at the website for the Messler Gallery ( http://www.woodschool.org/wood-school-gallery ) and wandered into the Centre for Furniture Craftsmanship's school section ( http://www.woodschool.org/ ), when I wandered over to their course descriptions. As I dreamed of taking a year off...
  15. Bridle Kerfing Plane

    This is my first project post on here, I recently completed my bridle kerfing plane build. For more info on what a kerfing plane is, look here: http://www.theunpluggedwoodshop.com/the-kerfing-plane-part-one.html. Take home message: it's a plane with a saw blade to make a kerf for resawing...
1-20 of 44 Results
Top