Search Results for ‘tv cabinet’

A friend of mine wanted this tv cabinet made like her husband made the counters in the kitchen. Used 3/4 plywood covered with 1/4" underlayment. So its basically made with 1 and 1/4 in ply. About 50in high by 38in wide. She wanted the ends for holding books of dvds. Minwax aged oak stain...

I got the inspiration from a cabinet I saw at Scan Design (last photo) and redesigned it to fit with the furniture we already have. Not sure what you would call the style maybe modern? It was made out of Sapele plywood for the case and solid sapele for the doors, draw and top I especially like...

One of the first projects I ever worked on its a TV cabinet with four fans built into it for my game consoles took 4 months to finish after a lot of trial and error. It is pine with a ceder trim on it, it has a cherry finish on it.

Just finished this new built-in entertainment center for our home. This is the first major project I've done in my new shop. I built the base cabinets as individuals so they were easy to move from the shop. The upper unit is split in 3 pieces, making it easier to move as well. I built it over...

This was an entertainment center we did a few years ago for a customer. It is made from maple plywood, solid maple and stained and clear coated with satin lacquer. It supports a 48" flat screen TV behind bi-fold pocket doors. The unit is 12' from end to end and about 8' tall. The black...

We recently finished this tv cainet with retracting doors …. it is a deceptively simple looking piece but there were subtle complications that emerged during the design process regarding the sliding doors, the depth of the equipment and wires, the exterior speakers …. etc … We have nearly...

I built this TV cabinent a few years ago. It is made from the red oak lumber that I got from a local tree that was cut down and processed. It has a pull-out, rotating platform. With the current direction toward flat screens, it may be a relic soon. But it is still downstairs with a TV in it.

Finally finished the entertainment center after two months. The wife and I were considering selling our home and buying a new home with a larger garage but after the builder kept stringing us along we decided that a low house payment and low interest rate on our current home was just fine to...

My daughter needed a cabinet for her new TV, but it needed to fit in the corner of the room, so I came up with a six-sided design. It is built of Red Oak, 41" wide, 20" deep, and 24 1/2" high. The two drawer boxes are 1/2" hard maple with machine cut dovetails and full extension slides. Due to...

Here is a TV cabinet I made for friends. Its made of Quartersawn White Oak solid and veneer ply. He bought me a dovetail jig so I could make solid dovetail drawers for him. I wasn't going to say no. I hadn't made flush inset doors in quite a while either so that was fun to fit everything just...

I've been dreaming about this project for a few years, spent 7 months building it, and finally finished it last weekend. During the design process I went through a few different craftsman inspired designs before going for this Greene and Greene theme. I've been on a G&G kick for the last year...

I made a large tambour (102cm x 68cm) with the Amana tambour set. Thanks, lockdown. The tambour itself is pretty routine (there are plenty of posts here on that), except maybe the relatively large size. I went by the instructions (i.e. milled the wood to exactly what they said) and it worked...

This is a TV cabinet that was built to match the Princess Curio built in November 2005. Both of them were built to match the Castle loft. Size: 60"w x 67"h x 18"d Wood: MDF and Maple Finish: Pigmented Lacquer/Latex accent color. For more building pictures like these see my Current Projects...

Project made for my living room, wall unit, 13 foots long made from oak. Took more tha a year to plan and produce. Lot of storage section, even use the space in the coloms for storing documents. Wiring all hiden, lots of drawers and even a bar Under the TV. 12 Volts lightning use on the top and...

This was my first woodworking project ever. My wife and I finally got a nice Flat Screen TV during the Thanksgiving time sales last year. We had a need for a TV Stand immediately. I finished this project in January, but I'm just now getting around to posting the pictures. While looking for...

It's been a while since i posted a project, so here's my latest. I built this for some friends, they picked out a design from pottery barn and I designed around that. She originally wanted mahogany until I priced it for her, then she wanted cherry and that was still too expensive, so we...

TV Lift Cabinet I built for a friend. Works awesome. Probably overbought on the lift though, I think this one could lift a truck, but thats me, Mr Overkill.

This is a murphy bed that I built in June 2015. It has a shaker style front with false doors and drawers. The upper bookcase was designed to hold a TV. This one was built using maple wood with a provencial stain by Minwax. More on this Shaker Murphy Bed. Building Pictures For more...

This TV stand is a complement piece to my bedroom bedside table/nightstand http://lumberjocks.com/projects/176274 After I had finished the bedside nightstand, the wife liked the idea of the hidden compartment and mentioned that she'd like a place to hide her more valuable pieces of jewelry with...

This is my first project in my new shop. The fourth large cabintet I have done on my own. The box is an "A" skin 3/4" plywood with a clear pine face frame and drawer fronts. The first and second pictures are the final product with three coats of poly. The last three are prior to stain and...