LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Projects M18 TOOL HOLDER ADDITION

    OCT 23, 2022 The acquisition of 2 new Milwaukee M18 tools required the addition to my previous CORDLESS TOOL STORAGE AND CHARGING STATION that I posted back in Aug 2020 . The new tools are a M18 4-1/2 inch Angle Grinder and a M18 Oscillating Multi-Tool. The Auxiliary tool holder idea...
  2. Work area for lathe

    My area for my lathe is shaping up! Lights & electric in now and I decided the area needed to be handy. On the first pick you can see that I put up a peg board and other items I needed for handy/easy access to the lathe tools. So I made up this holder and since I do have gkids I didn't want...
  3. CUSTOM TOOL HOLDERS •

    Jan 6, 2013 As a followup to the Tool Storage Cabinet, I thought Iʻd share what I learned about making custom tool holders. Most of the following pictures show the holder on the left and the tool in the holder on the right. If you want you can save photos to your computer for future reference...
  4. Wood Turning Room organizers

    The shop at the high school has just been renovated with a new polished concrete floor, painted walls and a new dust collection system. All the equipment has been moved back in and all the lathes are in this little cove. And the tools are in one pile for lack of a regular place to put them...
  5. New Tool Storage

    Replaced the white pegboard across the back wall of my garage shop with tongue and groove ponderosa pine siding that I picked up on clearance at the local big blue store. Made (and still have a few to make) custom tool storage for my growing collection of hand tools from scraps of walnut left...
  6. Rolling Tool Cart--Mechanic Tools

    Almost looks like a rolling "Craftsman" commercial!!! 36 inch x 36 inch oak plywood on both sides. 8 inch heavy duty casters under a 2×4 frame. Plywood surrounded by 3/4 inch x 1.5 inch solid oak. inside of plywood is 3 inch strips of oak plywood all around edges, glued and screwed for...
  7. French Cleat Tool Holders

    I have a decent amount of free wall space, and not much floor space. I decided to make use of this space with a french cleat system. I used 3/4" pine ply on all the tool holders, with a 3/4" poplar dowel for the pliers holder. The caliper and divider holders have proven to be the most useful...
  8. Wood & Lumber
    I recently helped a friend purchase some reclaimed wood for a dining table project. He chose some gorgeous oak barn wood siding with that perfect weathered red-barn patina. I was concerned that it would be difficult to achieve a suitable table top finish and still keep the character of the wood...
1-8 of 8 Results
Top