LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 37 Results
  1. Kid Shavers!

    Well, you don't actually shave a kid with them but kids can shave with them! I've been on a razor/shaving kick lately and the kids have been getting involved too. I decided that we all need our own razor to play shaving with. About an hour in the shop with some dowels, screws, and acrylic...
  2. Varmints Beware! (in Yosemite Sam's Voice)

    Here's a rootin', tootin', shootin' airgun for the likes of ya! This is a Crosman 1377 pump airgun that I made this stock and pump arm for. The wood is sapele with some quartersawn sycamore and black walnut for the grip cap. I used polyurethane in satin for the finish. Any comments or...
  3. Last One!

    This is it! The final razor, from the pack of 3, has been completed. The safety razor heads were purchased online from The Golden Nib. I don't know what the wood is that I used for this handle. It was a burl that was left outside of my parents house when they moved in. It sat outside for...
  4. Round Box with Lid and Base

    This is a lidded box turned on the lathe. It is maple with a beeswax finish. It stands 4 3/4" tall to the top of the finial and the base is approximately 2 1/2" x 2 1/2". I stained the base with dark walnut Watco oil and finished over that with beeswax. It was designed to hold a ring so the...
  5. Maple and Sapele Box with Lift Off Lid

    This was made for my brother in law for his birthday. It is made from maple and sapele. I shaped the belly of the sides and lid using the table saw to remove the bulk of the material and then used files and sandpaper to get it nice and rounded. It is sanded to 320 grit and finished with two...
  6. Wooden Dice!

    Funny how a fella can go so long and then an idea "pops" into his head. When the idea of making some wooden dice came to me, I thought Wow, what an original idea. It's so simple that I bet no one else has done it yet. Well, at least not posted them to share with others. Ha ha, was I wrong...
  7. Chainsaw Bowl

    I got bored one afternoon and decided to try carving a bowl with my chainsaw. This is what came out! The wood is English Walnut cut down from a neighbors yard. I primarily used the chainsaw for this but I did use a band saw, jointer, and some hand tools too. It has Watco Butcher Block finish...
  8. Finally Pulpit!

    I have been working on this project for waaaaaay too long! Fortunatley the church wasn't waiting to have a pulpit until this one was done. :) I am pleased to say that it is finished and ready to be taken to the church. It is funny how picky I can be about my work when I know that people other...
  9. Pizza Time!

    I love pizza! I don't think there is any such thing as bad pizza. I even like the cheap frozen stuff! But, this isn't about me our how much I like pizza. It's about a buddy of mine that I met through an airgun forum about 6 years ago. We live half of the nation apart from one another but...
  10. Bathroom Shelf with Towel Bar

    Woodworking is not only fun, but practical. Our towel bar, that was mounted to the wall with those plastic drywall screw type thingies, finally worked itself free on one side, looking like an old jalopy car with broken suspension springs. The one side was hanging on for dear life while the...
  11. Get a Grip!

    Walnut grips and pump handle for a Crosman 1377. This piece of wood was salvaged from a wood pile! It's a nice chocolate brown with small pores and very hard for walnut. I wish that I could get my hands on some more firewood like this. These are for a fellow airgunning friend for his pistol...
  12. Black Walnut Lidded Box

    I turned this box from a limb of black walnut that broke off of our tree from freezing rain last January. The limb was about 10" in diameter at the largest point. I rough turned the blank for the box in February and finished turned it in July. The wood warped so bad that I didn't have enough...
  13. Rifle Stock (Reshape and Refinish)

    Hey folks! One of my other hobbies, other than woodworking, is shooting airguns. Yes, a grown man shooting BB guns in his backyard! ;) Once I got into the world of higher end adult airguns, I realized that there are some pretty high quality equipment out there, not just the stuff that is...
  14. Retro Pen Kit

    Here is a "Retro" pen kit from Woodcraft. I used some spalting Laurel for the wood blanks to turn the pen. I used CA glue and wax for the finish. This was a gift for my oldest son's first day attending a local community college. Thank you for looking! Here is a video link to making this...
  15. More Skateboards! (from 2x4's)

    Been making some skateboards lately! All of these decks are "planks" made from a single 2×4 each. You can see the way they are glued up in the first picture. The hardware (trucks, wheels, bearings) was purchased from Amazon. These longboards are for sidewalk cruising, not bombing down hills...
  16. Pellet Box

    I like shooting air guns. I like woodworking and woodturning. I decided to combine the two and this is what I came up with… a pellet box! The wood is maple, turned on the lathe. It holds a whole tin (500 ct) of .177 cal pellets. I finished it with Deft spray on lacquer in satin sheen...
  17. Sapele and Madrona Skate Deck

    Finally I was able to make a longboard for myself. Sapele and Madrona finished with polyeurathane and wax. My own design. Just a simple plank with wheels.
  18. Turned Poplar Box w/Lid

    Not much to say other than a lidded box made of poplar, I think, turned on the lathe. I haven't applied any finish yet but I am thinking of shellac for this one. I am sure that the beauty of the wood will really come out after the finish is applied. Here is a video of this same project being...
  19. First Attempt

    Hey folks! I wanted to make something for my sweet for Valentines day, to let her know that I care. I wasn't really sure what I wanted to do. I decided last minute to try and make a ring out of wood. I didn't really research how to go about it but I have watched some videos on bending the...
  20. Sapele Mancala Board

    This a playing board for Mancala. The cups were routed freehand with a box core bit. The legs are sapele turned on the lathe. Finish is boiled linseed oil. I sprayed the inside of the cups with black spray paint to try and give it an aged/patina look (and to hide the burn marks!). The...
1-20 of 37 Results
Top