LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Cherry and Maple Saddle Bar Stools

    Build Video to this project Saddle Bar Stool Build This project started as a means to use some wood that had been laying around my shop for a couple years. The seat tops themselves are from a tree that fell when I was in college. While a friend of mine had cut up some of it and milled it, I had...
  2. Maple, ebony, & brushed stainless steel table

    I made and designed this piece for some good friends of mine that just finished building a modern 6 story home looking over Seattle's lake Union. I chose to use maple as the primary wood in order to match the maple butcher block counter tops in their kitchen and ebonized maple legs & arched...
  3. Eastward Bench

    Completed a pair of these benches in July 1998. This is a Thos. Moser Eastward Bench. Follow this link to see how I did at duplicating Moser's design. My parents came for a month-long visit while I was stationed in Germany. I was only able to take two weeks off while they were with us and...
  4. Leigh dovetail jig

    Well, I did it I bought a Leigh Dovetail Jig. You know it's one of those items that you think you just can't do without. I decide that if I was going to spend that kind of money I might as well make a box to hold all the miscellaneous items in and if I'm going to make a box I had better carve on...
  5. Chair

    Chair made to match dessk for my daughter. Solid walnut with faux suede cover over two inch foam pad.
  6. Vanity Base

    I was commissioned to build this piece for some friends who were remodeling their master bath. It's made of red oak and finished with Minwax oil-based Classic Oak and Sedona Red. It was designed in AutoCAD around the vanity purchased at Ikea. The grate shelf fit together very snugly with the...
  7. Wine table I call the mortise and tenon glue up nightmare!

    Walnut live edge slab with quartersawn oak base and bowties. 40+ mortises and tenons. I was trying to glue up on my own and quickly desperation set in. Luckily a friend showed up at my shop and my look of horror required no words. He promptly grabbed a glue brush and we got it glued up...
  8. Maple Sink Base

    Here's a maple sink base I made based on homeowner sketches (yikes!). All material was rough cut to begin so all the milling too me quite a while. He wanted 4 inch thick legs so i ended up using 10/4 and gluiong up two pieces after carefully jointing them. My years in a handmade furinture...
  9. Japanese Stool (Hand Tools Only)

    I built this Japanese stool for someone, and wanted to use only hand tools. The stool has 12 mortise and tenon joints, and is glued together. The lumber is recyled from an area construction site. The top was shaped using tons of saw kerfs as stop cuts along the top to the desired depth of the...
  10. Live edge beetle kill pine sofa table

    This was my first real project. I welcome any and all criticism. Please let me know what you think I could improve on. I made this entirely from beetle kill pine. I bought all of the wood from Rocky Blue Woodworks out of Westminster Colorado. Those guys run a portable mill and have been...
  11. Tile Display

    This frame was an anniversary gift to my son Ben and his wife Jenna. I was looking for a project to try out some of the joinery and details often seen in early Arts and Crafts pieces, especially from the Greene and Greene brothers. These "tiles" are actually color prints of tiles that I found...
  12. QSWO Mission Style Media Cabinet - M&T

    Finally finished this beast. This is my biggest project yet. When I started it 4 months ago, I had a lot of questions. I came to the forum for help, and I appreciate all of the advise I got from you guys. There are nearly 80 mortise and tenons on this piece. To start this project, I picked...
  13. Live edge spalted maple bench with walnut inlays and carved letters, Don't Tread On Me!

    This live edge bench was salvaged material from a storm damaged tree taken down in a local town. I used hand cut mortise and tenon joints, glued not screwed. The cross brace is one half of a larger slab (or flitch, if you want to be fancy). I hammered wedges in an existing crack to get the piece...
  14. Planter

    This is a planter I made for the final project in a basic woodworking class. The legs are made from laminated white oak and walnut, the rails and bottom are hard maple, and the thin vertical strips are cherry. All the joinery is mortise and tenon, and the finish is several coats of Minwax...
  15. Maple Left-Handed Workbench w/ Emmert Patternmaker's Vise

    I would like to share one of my latest projects that I can finally say is finished. Believe it or not, I only have around $350 in this workbench. The majority of the construction took maybe 2 months (working a couple days per week on average) and mounting the Emmert took a full day and a half...
  16. chair repair

    Windsor chair repair, turned and replaced a leg,back rung, and lower stretcher with poplar
  17. Shop stool

    My first proper piece of furniture! Hard Maple and Walnut, all mortice and tenon joinery, bar the screws holding the seat to the aprons. Finished with Tung oil. Lots of mistakes made and lots of lessons learned but very happy over all.
  18. Walnut Stool

    I have made a few of these stools over the years. It is from a Woodsmith plan from the early 90's, which I have adapted to suit the project I wanted to build. The first few I made with square legs, and a bandsawn top. That was before I got sucked into the turning vortex. The seat is 14" in...
  19. Stiletto Cabinet

    ---------------------------------------------------- FOR MORE INFORMATION PLEASE VISIT MY WEBSITE: blakeweber.us ---------------------------------------------------- Solid figured Maple and Claro Walnut. The cabinet is 27" wide, 17" tall and 12" deep, and it stands 58" tall overall...
  20. Reamer, tenon cutter

    I have a Windsor chair project in the works. Lots of parts roughed out and drying after splitting them from a walnut billet. I have never built a chair before, but have been reading a lot, including a book from Peter Galbert which is just full of information. So anyway, this is part of the...
1-20 of 500 Results
Top