Search Results for ‘tabletop’

Got the idea for this from one of those weekend project type books. Didn't like the radius'd ends they showed so I made the ends into the profiles of two mountains I see almost every day, Mt Rainier and Mt Baker. For fun I added the elevations to each side. Australian blackwood and I forget what...

This is a raised herb garden I built for a friend (actually built two). Made it out of cedar, and used pocket screws as well as deck screws. It measures 60" long x 18" deep x 40" tall.

A stylized leaping dolphin in walnut. This is 12 inches tall, roughly 1.5 times the size of the original pattern. Pattern is from "The Art of Stylized Wood Carving" by Charles Solomon and David Hamilton.

You need a decorative element on a present? I made this flower as decoration for a present. Tools and Materials: A plane. For example a Stanley No.4. A glue gun with glue sticks. A pair of scissors. A piece of wood. Instructions: Set your plane up for creating relative thick...

I can't believe it's been almost 600 days since I posted a project so I thought I'd toss this one out there. This is my version of Tommy Mac's wall cabinet. I used cherry wood and through dovetails instead of the half- blind Tommy uses. This was fun to build and learned a few things. Next...

Needed a mirror frame so my wife suggested an oriental one. This one is made out of Douglas fir barn wood. No fancy joinery, just screws on the back with some plywood to reinforce the mirror. Our barn cat was helping with the pictures.

This piece is 22 tall with a 20X24 top. I had to remove some material from the inside of the bottom to get it under 150lbs so it wouldnt have to go freight. The black discoloration is from metal, a few strands of fence.

Tripod table. Made from Mahogany, finished with shellac and wax. See more work at my website and my blog.

This is a 5' Rustic/contemporary dining table 1/2 inch flutes on all sides with a semi gloss light navy paint top is 1 1/2" pine biscuited together and finished with a golden oak stain with 4-5 coats of lacquer. single beaded apron is pocket screwed to legs entire apron pocket screwed to 1...

This is my bandsaw/drill press table. I like to use this smaller bandsaw for doing smaller projects because I like to leave my bigger bandsaw with a resaw blade installed at all times. I put a vice on the work table and I made it so I can pull the bandsaw in and out of the table by using 2...

It has been a long time since I posted anything. In the past 6 months we moved so I have been working on setting up my shop again. In the new place I don't have as many work tops as before so my workbench has been littered with my tools and boards and chips. I decided to make this because I...

About 6 years ago while surfing eBay I stumbled upon a cool bookrack auction. It was a marked Gustav Stickley bookrack. I saved it to my favorites and watched it sell. It closed at $800. Saving the pictures and dimensions from ebay for a later project, I sketched it in Autocad. About 2 months...

This chunk of mesquite was cut just above the root. As a result,it has quite a bit of burl grain in it. There was a limb that had grown out very low on the tree and it gave the piece a very interesting crotch grain effect to part of it. The last two pics show the piece as I got it. As with all...