LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Lathe SteadyRest

    My neighbor asked me to turn a cane for him, and I said sure, no prob…...I've never done anything this long. It's like a gigantic pen.. Anyway, he brought me a 3×3" piece o Poplar. I split it in half, put a 3/8 piece o Walnut in the middle, and while it was gluing, I thought, hummmmm, I'm gonna...
  2. First Coffee Table

    This is made of cherry and trimmed with brown oak and maple with padauk stripes. The frame is finished with sealer then two coats of clear gel and two coats of satin poly. The top was the same except four coats of clear poly and all was wet sanded with a mixture of mineral oil and denatured...
  3. Power Tools, Hardware and Accessories
    Hello, I've read the postings for a few years now but it was only earlier this year that I became a member and since then I have learned so much from all of you… Thank you! Just a bit about myself… it was back in the 70's (sixth grade) when I pushed my first piece of wood passed a table saw...
  4. Power Tools, Hardware and Accessories
    Hey LJ's! I just replaced my 40 tooth carbide blade in my Cabinet saw. I was cutting 45 degree miters on my table saw in pine. I noticed the blade burning the wood. Took it out and used a soft wire brush on the teeth and it seemed to work OK. I then took some oven cleaner and gave the blade...
  5. Woodworking Skill Share
    Just had the most interesting experience. Whist prepping for my next project, I decided it was time to clean up my Tenyru Gold Metal 40 tooth saw blade. Out came my Boeshield Bit and Blade Cleaner, spray it and wait the 30 seconds. Pull out toothbrush and start to clean, but wait why isn't the...
  6. Blogs
    Sawstop Brand Dado Blade Review BTS-DS8-2402 Here's my video review of the new Sawstop brand dado blade with full test… It's a Sawstop brand Dado blade BTS DS8 2402 that I tested on a Sawstop 3hp PCS, and a Laguna Fusion F2 tablesaw. I've owned and tested dozens of dado sets, so I can share...
  7. Blogs
    Flea Market Scores Dropped by the local weekend flea market on Sunday, just thought I'd kill a few minutes sharing some of the goodies I picked up…. (thats right, its "sharing" not "bragging" lol!) A B&D twin-screw benchtop clamping thingy I got for $4, looks damn handy, tho those metal jaws...
  8. Power Tools, Hardware and Accessories
    This is a video of a new type saw blade. It looks pretty good. Check it out.
  9. Power Tools, Hardware and Accessories
    Hey team, What advice do you have for a "home remedy" for table/chop saw blade cleaning? I'm in a small home hobbyist shop, but need to clean a couple of saw blades. Is there a good home remedy, or am I better off to buy a product from CMT or other retailers? I really just want the best...
1-9 of 9 Results
Top