Search Results for ‘t-slot’

Detailed write up on my blog: http://xylotekniche.com/2016/02/01/drill-press-table/. Built a large drill press table with a fence system made out of 8020 extruded alumnium. Fence gets tightened down in the back to the table's T-Track system. Extended the drill press height adjustment towards...

Here's a router table and fence I made, based on 2 different Shop Notes articles. Its the most complicated project I've done yet, and I can definitely say I learned alot. The base is essentially mortise and tenon. Each leg is made by gluing two 2×4s together, each with the appropriate 1/2...

I had been needing a workbench in my garage for years. Whenever I got to the point of actually assembling anything I was making, all I had was a small Black and Decker vise table. If that was too small, then I first had to slap together something, delaying the original project. I spent too long...

Here is an accessory that I made to improve my miter gauge. It helps considerably to hold the work secure when crosscutting. This little improvement has helped me, and so I thought that posting it might be useful to others. I used a piece of MDF and cut slots for my stop block. On the back...

Like an earlier post http://lumberjocks.com/projects/22802 I needed some hold downs for a new project and just could not rationalize the woodcraft price. So I went looking at the local big box store and found an answer. Bought a clamp for I believe under $2, drilled out the rivet, cut the...

I had a need, so I filled it. I had some items that the stock hold-downs supplied with my CNC Router just couldn't handle. The main need was to be able to secure items that had irregular sides as well as items on a diagonal. Here's what I came up with - maybe it will spark some ideas with...