LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Information Sign Board w/ Magnetic Frames

    This is another project for the summer camp I work at. It is a sign board that displays the pictures/cell phone numbers of our 3 staff hosts on duty, it has two 8.5×11 frames for general group information/schedule, and it has a weatherproof literature box to hold our camp maps. This is one of...
  2. Outrigger sailing canoe

    Here is a summer project from two years ago that I never posted. It is a skin on frame outrigger sailing canoe. The frame of the canoe is made with white oak ribs and larch for the gunwales, keelson, and chines. The seating platform and outriggers are douglas fir. The skin is nylon with varnish...
  3. box jointed bee hives / bee houses, bee larva supers for 3 new swarms i captured

    my buddy and i caught 3 swarms of honey bees last weekend in some trees. we already have 3 hives between us and were excited for 3 more. they look to be italian bees. built the boxes from pine, using box 3/4 inch box joints. i make the jig finger .004" smaller than the router bit, and set...
  4. Another Super Sled

    Well, I finally took the plunge and made a super sled. I've been wanting one for a while now. In fact that's how I found Lumber Jocks by investigating the super sled. I've only been on LJ's for a short time but I thank you all for all the great ideas. Thanks to Horrizontal Mike and...
  5. Poker Table

    This was the first poker table that I built for some friends and you can't see it in the pictures but it has fold up legs underneath it so that it looks like a solid table with no crease down the middle but folds up to be around 8" thick. Even though it is 5' tall you can roll it into just about...
  6. Woodworking Skill Share
    After seeing this fantastic Tip for the Table saw, I just HAD to pass this on to ALL of you LumberJocks. I'm sure you will remember this as one of the Best TIPS you have ever seen! Bar NONE! So, click and watch the short video and really GET EDUCATED on the Table Saw!
  7. Power Tools, Hardware and Accessories
    Helly everybody! this is a very rookie question and I know this is the best place to get advice. I am a rookie at pen turning, I just uploaded my first project pen ever, and I used CA glue because that is what I've seen 99% pen turners use. I have a couple of questions. No. 1 what is the...
  8. Blogs
    Cyanoacrylate wood finish? I thought "What if I coated the whole ring in cyanoacrylate finish?" ...and I tried it. The rings have since been through regular everyday wear including dishwashings, handwashings and showers. END RESULT: This finish is holding up better than both Waterlox and...
  9. Finishing
    Earlex 5500 Super Sale with 2 tips ... and FREE SHIPPING! $319.99 Must enter the code FREEDOM2012 in the customer notes window at checkout While in Stock… This is really exceptional… if you've been thinking about this, this is a good time to snag it! Good Luck!
  10. Finishing
    got on my hardwood floor while i was painting. There are several spots on the floor that made its way around my tarp. The floor is finished with a water-based urethane topcoat. Now, can I use a little mineral spirits and denatured alcohol to take out these spots, or will it remove the...
  11. Off Topic Coffee Lounge
    Listen to this Kid! Learn to be Happy! He's really COOL… and his ideas, when you really think about it, really have some serious content. Take a break… Listen & watch his presentation... You will be Happy you did.
  12. Woodworking Skill Share
    I'm in the process of making a project that will utilize rare earth magnets to hold a light in place on a machine. I was wondering what type of glue to use to embed my magnets into the wood. Hopefully it's something that Walmart, Lowes, or Home Depot carries, so I don't have to order it. I...
1-12 of 12 Results
Top