LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. lipped lid box

    lipped lid box made of oak with mahogany veneer plywood for the top 4" square by 3 1/2" high inspired by Steve Ramsey of wwmm in an early video sanded to 320 and finished with 2 coats satin polyurethane this one is for the craft fair does anybody have a good price to sell this for my costs were...
  2. Pine Picture Frame

    I decided to throw my hat at making a picture frame to fit a 4×6 picture, I'll do my best at describing the steps so bear with me. I found a great step by step video on the below website and link. The below link will show you how to build this frame on a website called...
  3. On lathe buffer

    I wish I had thought of it. This is in the Oct 2012 Wood magazine, a tip from Tony Finlay from South Penrith, NSW, Australia. Thanks, Tony.!! Great idea using paint rollers as buffing pads. He used a dowel between centers, I turned a taper to be held in a chuck and cone live center. Everything...
  4. Bench from Reclaimed lumber

    I made this Garden Bench from green treated lumber that would have went to the landfill, It is made from 2x lumber
  5. Router table Box Joint Jig

    After tons of research online and help from my LJ's buddies I designed my own box joint jig for a router table without a sliding mortise track.. This project took much longer than I thought because of the minute adjustments I had to make in the jigs final position and secure the cleat.. But...
  6. My wife got a new job...

    Which, of course, will mean new business cards. And … of course … THAT means she'll be needing a way to display them, on her desk. AHA ! A PROJECT :-) For the woods: Wenge, Maple, Bolivian Rosewood Morado, Padauk, and Jatoba (not in that order !): Slice 'em, dice 'em, glue 'em up, and...
  7. Joinery
    I'm fairly new to using the router and hoping that someone can explain the error of my ways. In photo below, you'll see the problems I had routing a rabbet in the side of my pine picture frame. (I cut the miters after routing because it seemed easier to push the piece through on the router table...
  8. Power Tools, Hardware and Accessories
    You wouldn't think it would be tough to find ANYTHING online anymore, but even Google isn't helping much right now. I'm trying to track down a 1-1/2 inch diameter straight bit with a bearing to use for a JessEm plate install (Route-R-Plate instructions suggests it). I figure it's worth it...
1-8 of 8 Results
Top