LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Table Saw Storage

    Here is a solution I came up with for capturing the storage potential under my contractor saw… Dust collection comes to the cupboard under saw… the back up the saw needs to be sealed up to create more velocity and targeted DC. The far right bottom drawer will be used to store saw blades… a...
  2. Baby storage bench

    This bench was primarily built as a storage solution for baby stuff. I really like the concept because it should continue to serve our needs beyond the toddler years. It's built primarily from birch plywood with poplar face frame and trim. I ordered all the baskets first and then designed based...
  3. Kaizen Foam Cabinet Doors! (VIDEO)

    I documented the video process on my YouTube channel: I took a set of old cabinets from a friend. The carcasses were fine but the doors needed to be rebuilt. During the process I thought of putting a french cleat system on the door front for extra storage. This worked okay, but it looked a...
  4. Finally! A place to put my Osborne Miter Gauge.

    I love my Osborne Miter Gauge but every time I need it, I dread the fact that it is probably buried under something and then I have to put it back somewhere it doesn't really belong. It is too big for most drawers and I really like to have it really close at hand when at the table saw. Now I...
  5. New Wood Rack

    If you have never had the chance to move your entire wood pile and organize it, this new rack system I installed is a good reason for it. I purchased two of the systems for a total of 4 columns. I am just floored as to how much weight is on them and it is still holding all that lumber. Can...
  6. Woodworking Skill Share
    Hey guys, what do I have to do with this MDF to accept white spray paint. I put two coats on and it doesn't even look like I did anything to it. I used a white primer in a spray can. I tried a small scrap piece and it took 2 coats of primer and three coats of semi-gloss white paint to complete...
  7. Finishing
    I have a piece of furniture and I dropped 40 degrees alcohol over it and bleach in the area.I cant tell you what wood varnish was used because its old .It have many emotional implications for me so i don't want to restore.Can anyone who have experience or have same problems like me, to clean...
1-7 of 7 Results
Top