LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Ridgid OSS Rolling Stand

    Here is my rolling stand for a Ridgid oscillating spindle sander. The cart has 3 full-extension drawers on heavy duty ball bearing slides. The wheels are Steelex double locking swivel casters in the front, and fixed casters in the rear. It is nice to have a dedicated space for all my sanding...
  2. Lathe Stand with Storage

    Hey, guys! I made a lathe stand with tons of storage for my JET 1221 lathe. Loving all the extra space this thing gives me. If you'd like to see the full build video or get plans then you can see them at: http://fixthisbuildthat.com/diy-wood-lathe-stand-plans/ Thanks! Brad
  3. Beer Storage and Brewing Table

    This was a quick utility project made with plywood and biscuit joints. Pocket screws were also used to increase strength because of the weight that the cabinet will have to hold. Also because of the weight we used edge strips to support and stiffen the middle shelf and top instead of veneer to...
  4. Kitchen Cabinet

    I completed this storage cabinet in March of 2017. My wife requested this cabinet to store all of her cookie cutters and decorating tools. The case and drawers were built with baltic birch plywood. The drawer fronts and the base were constructed with poplar. The top was made from red oak...
  5. Zoo Keeper For Stuffed Animals

    One of my neighbors has two little girls who both love stuffed animals. As most parents know stuffed animals are great but can get a little out of control. In this case the Mom was tired of walking into the girls room to find the "stuffies" everywhere, so I was asked to build this Zoo Keeper...
  6. Shop Storage

    I have a lot of screws and hardware that I have accumulated in my shop and I wanted some drawers for tool storage. I put these together. Not perfect but they do the trick. 10 sheets of 3/4" and 5 sheets of 1/2". I used the cheaper plywood from the box stores. Didn't pony up the money for...
  7. Slanted Scroll Saw Cabinet

    This project started in late 2011 when I got a new scroll saw and decided to learn the computer software program "SketchUp" about the same time. The idea was to create a functional cabinet made of maple with slanted sides and front to match the angles on the scroll saw's metal stand. The back...
  8. storage cabinet for the CNC stand

    Wanted to turn some unused space under the CNC into some suitable storage space. I just have to clean up the wiring and fasten it down. Construction is BB plywood with rabbet/dado joints. Finish is shellac (so minimal sanding required) then several coats of semi-gloss HP topcoat from General...
  9. Sliding Door Wall Cabinet

    I was tired of running out to my storage closet in the basement every time I need a nail or screw, so I built this simple wall cabinet with sliding doors. I used a router to carve out all the tracks for the sliding doors and also made dadoes for the shelves. Assembled with glue and pocket...
  10. Shop Improvements#3: Storage Cabinet

    This wall cabinet is from WOOD Magazine. I got the plans out of "Best-Ever Home Shop Ideas 2009". It probably appeared in a regular issue of the magazine at some point, but I don't know when. If you're looking for the plans on their website, I think they call it a "Tool Cabinet". It's 32...
  11. Modular Router Table

    After I bought a table saw I thought it would be a good idea to take a class in woodworking since I haven't done any real woodworking since high school ( Safety 1st ) . So I needed a project and what better project than another tool. After looking on the Internet I found this one at Plans now...
  12. Storage Cabinet

    This is my long time promise to the wife - storage cabinet for kitchen/household stuff. I built it this summer, but just recently added smaller unit on the side that fills the gap between the wall and main cabinet (have no idea why I didn't built it in the first place). The cabinet is built...
  13. Hardware Storage

    I saw this in a smaller version in a woodshop website somewhere else. So, if it is yours, Thanks for the idea! I thought I would share it with Lumberjocks. It has turned out to be very convenient and I have built several for friends and family. I really like the fact that the containers are all...
  14. Round Mirror Frame

    Cherry with walnut splines around an old mirror.
  15. Nail Cabinet

    I completed this wall hanging nail cabinet in August 30, 2015. I used the plans and instructions from a Christopher Schwarz article on popular woodworking. Unlike the original, this one is made using Poplar, 2×4 Douglas Fir and quartersawn Red Oak (all materials where available in my shop at...
  16. Storage Cabinet and Corner Cupboard

    This piece was made from reclaimed shutter doors as the site panels and wide old growth hemlock boards as the shelves. I made the dental molding with a router and a homemade jig. This is a heavy piece, not looking forward to ever moving it. The finish is regular discounted dented paint from...
  17. Storage Cubbies

    Built from baltic birch, serving as a shoe rack but I could see this being used in a number of different places. I think I'll start using baltic birch more often. very nice plywood to work with. If you want more details on this project I have a video, article, and downloadable plans at my...
  18. Power Tool Cabinet

    I was able to pick up a free 4×8 sheet of 3/4" particle board on craigslist and since I was tired of seeing all my power tools scattered in the corner of the workbench, I decided to put it to good use. It definitely has its flaws and it came out a little bigger than I had originally thought it...
  19. Hardware Storage Cart

    This is a hardware storage cart I built. It holds seven Stanley Professional Organizers, four regular ones and three deep ones. It was designed to fit below my drill press table. It is made from 3/4 birch plywood and poplar. The brackets for the organizers are made from 3/4" aluminum angle...
  20. Cherry Vanity and Storage Cabinet

    This is the latest cabinet that my whife "commissioned" to be added to one of our bathrooms. The vanity and storage cabinet are constructed from cherry solids and 3/4 cherry plywood. The finish is my usual routine of BLO, sealed with 1# coat of shellac and topcoated with wipe on poly. I have...
1-20 of 26 Results
Top