LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 241 Results
  1. Step stool

    This is the step stool I designed and built in shop class. I chose walnut because I thought it looked good and it is very heavy duty. After I cut my pieces to size and routed the sides it was time to stain my projects. I decided to use Antique Cherry because it just gave the wood a darker look...
  2. Step stool

    I made this step stool with cherry wood in woods class, I did not stain the wood. I used the rounded edge for the routing process of the project. I used tung oil for finish. I had a little bit of trouble sanding the wood down.
  3. Another Inlayed Folding Step Stool

    So I made this butterfly inlay step stool earlier in the summer. I bought wood to make a second stool at the same time. Well after much frustration, both with the inlay and with the finish, I'm finally done with it. The wood is goncala alves, sometimes known as tiger wood. It's really heavy...
  4. African Mahogany Footstool

    African mahogany wood, basic foot board design with A-shaped legs, rounded router profile design, stained, tung oil
  5. Step Stool

    I used hickory style wood, with a round over router. I applied two coats of cranberry red stain and two layers of tungoil.
  6. My Step Stool

    I made this stool in my Woods class. It is made of African Mahogany, with a half circle leg design, a rounded router bit. It doesn't have any stain on it because I didn't have time time to add it. The type of finish i used is Gloss Tung Oil.
  7. Step stool

    I made this step stool in shop class for a project, it is made out of cherry wood, I stained it with a dark walnut type stain, and finished it with gloss tung oil
  8. Shaker Step

    Hi all, just finished a shaker step for the grandkids to wash their hands int he bathroom. Made from cherry, with danish oil finish. all hand tools were used for the process… quite rewarding I must say thanks for letting me partake in the forum!!! kind regards, David
  9. Step Stool

    I am just a beginner. This bench came from my head kind of ad-hoc. It's for my Daughter. It made of Poplar.
  10. Sliding step stool

    I recently seen a picture online of this step stool & decided to copy it I just cut 2 dados for the small step to slide in.
  11. Stepstool

    I made this in shop class out of alder and poplar. I used Tung oil to finish it.
  12. Step stool

    I mane this in shop class. I used white birch for my wood and used tung oil for my finish.
  13. Stepstool

    Made in shop class, cherry wood, finished used in the project was tung oil
  14. Footstool

    I made this in my 11th grade woods class. It is made of from poplar wood. I used a tung oil for my finish.
  15. Step stool

    I made this in shop class. The wood used was poplar and alder. The finished used was Tung oil.
  16. Stepstool

    Made in shop class. Made out of cherry. Finished used: Tung Oil
  17. Stepstool

    Made in shop class. My material was Cherrywood. And the finish shine was by ting oil
  18. Step stool

    Made in wood shop class. Made out of cherry. Used tung oil for the finish.
  19. Stepstool

    This project was made in my High School Shop Class. It is made out of Alder. The finish is Tung Oil.
1-20 of 241 Results
Top