LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 201 Results
  1. BOX FOR BOXCLAMP

    TONY/WOODSHAVER made a nice box to store the box clamping jig and I thought I should make one as it keeps everything nice and tidy . So here is the box I made for my box clamping jig . http://lumberjocks.com/projects/303162 Made from a spruce fence board and some red cedar I had laying around...
  2. Aztec - A 3D Game

    I'm game crazy I know, but how bout a new one? Are ya up for it? This one's a beaut. A game that suits a builder's challenge as well as probably being really well liked by spatial logistical types. You know who you are. To play, construct a three level building with your opponent, using one of...
  3. Coffee Table

    I decided to build a coffee table as my first major woodworking project. I didn't want to invest a lot of cost into the materials but I also wanted to use something decent, so I chose poplar. The top was made from an edge glued panel made from spruce or aspen wood purchased from Lowes. I used...
  4. Bat Car - Toy Car - Batmobile - Play Pal

    This little car is a lot smaller than the ones I posted previously. Only 3.5 inches long. I've made quite a few of these and this one is by far the best looking one. I made it from some spruce I had from a very old project. I'm not saying how long I've had this wood. It smells like Christmas...
  5. Tom Wolfe inspired cane

    A Tom Wolfe inspired cane , the bird's head handle is carved from bass wood , with a black leather and crab apple spacers. The shaft is found wood , made from bark beetle damaged spruce. Materials Wood - Spruce Handle - Bass Wood Spacers - Crab Apple + Leather Finish - Danish Oil [walnut]...
  6. Guitar #2 - Spruce / Maple

    Finally had the chance to post my second guitar. This one is made with a spruce top, and maple back/sides. I've always been amazed by maple, because when I was a kid I only knew narra, mahogany, and philippine ebony. I first encountered a maple guitar when a friend brought one his dad bought...
  7. TIMBER & STONE

    This is a box design that I have been thinking about for a while and finally made it with a few changes along the way as usual . The box is made from spruce pieces (stone) glued to a ply backing and western red cedar for the top and beams the tray and bottom are lined with light upholstery...
  8. Mom's Quilt Trestle

    This is the finished Quilt Trestle I made for my Mother. The story goes like this. My Mother called and asked if I could assemble a Quilt Trestle for her. Of course right, after all she's my Mom. She shows up with a small box about 6"x9"x14". I figure, how long could this take? No time at all...
  9. Mountain Ash Walking Stick

    The found wood for this walking stick comes from a backyard mountian ash trimming. Often very usable wood is sitting close by but we don't always notice it. The handle is made from a elk antler , the first year elk grow straight antler , the antlers grow as 2 single spikes known locally as a '...
  10. KRUSEKOPF

    This box is a tribute to my Ant and Uncle who where a great influence in my life and I miss them a lot and have great memories from those days . The box is made from spruce an jatoba with a maple panel set in the lid cut to a diamond pattern with my cutting jig...
  11. STUB VISE

    This is my new vise design that I call STUB VISE . The vise is of the auto quick release type as seen in most of my vises and made from spruce and hickory a 3/4" Acme screw leather pads on the chop and a maple handle with walnut end caps that will stay put in any desired position .The vise...
  12. Spruce Burl Hiker

    Materials Wood - Spruce Leather Lanyard Brass Bottom Cap Satin Poly Finish Dark Walnut Stain Ball Compass 53 inches This stick not only has burls, it was also damaged by bark beetles, which can be seen in the 6th photo.
  13. JAPANESE ZEN

    This is another dream i remembered when I woke up the other day. Having totally failed at a different design the previous day a thought I try Japanese and my wife ask if all those words ( FUJI MAKITA DIAWA ETC ) I was using while designing and building this piece where Japanese ? The design is...
  14. Waney Edged Bookshelf

    This was a project commissioned by a client and fulfilled by master Craftswoman Jo Black with the help of some of our participants. We believe the wood is some sort of spruce, Jo used Mortise & Tenon joints to attach the shelves and finished it off with a clear lacquer.
  15. Halved Dovetail Corner Crate (CNC)

    This is a prototype of a bicycle crate I would like to sell on my etsy page @ http://www.etsy.com/shop/IVAMIR The joinery come from http://www.flexiblestream.org/project/50-digital-wood-joints Wood is SPF. Glue and nails (on bottom only)
  16. Fanned Fret Guitar

    I've only ever posted smaller projects here, so I thought I would share something more serious that I just completed. This is the 7th stringed instrument I've built, and the second guitar. I started designing it back in October, and strung it up for the first time on June fifth. It was about 170...
  17. votive stand

    This a votive holder I made from laminated wood and is a project that has a story too it. My grandson came over one Saturday morning proclaiming that the candle holder in their bathroom ,that I had made earlier had burned down and we should make a new one . At first I was shocked but soon...
  18. Small cupboard for make-up utensils

    This is a last years christmas gift: A small, wall mounted cupboard for make-up utensils. It's made of 18mm and 5mm spruce. In the door is a mirror integrated. The dark parts are just varnished. Originally I planned to use aluminium parts for this. That's the reason for the aluminium parts in...
  19. DIAMONDS FOR THE BIRDS

    Here is a bunch of bird houses my Grandson and I made . We used spruce for the first one (middle in pic 6 ) as I had a diamond pattern board in the off cut bin and it looked great for the roof and went from thereto make several more out of red pine which we both liked better because of the...
  20. Found Wood Spruce + Antler Cane

    This found wood cane uses spruce [no insects this time] with the outer bark removed down to the inner bark. I gentily warmed the bark to raise the sap in beads on the surface. Then with a rubber glove rubbed the sap onto the surface . I'd like to think this adds to the colour but I could just be...
1-20 of 201 Results
Top