LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 70 Results
  1. Texas Flag Bandsaw Box #2

    This is my second flag box to make as the first one sold, I used Walnut to resemble the blue, mahognay to resemble the red, spalted hackberry to resemble the white and spalted hackberry for the inlayed star I used my scroll saw for the inlay, it has 7 drawers with one hidden making 8 drawers...
  2. Drinking Coasters Cut with Bandsaw Spalted Hackberry

    I made these from spalted hackberry, the limbs were about 4 1/2" in diameter cut with bandsaw. Thanks for viewing and comments :)
  3. Men's Valet Box With Hidden Compartments

    The wood used in this project is Spalted Hackberry in which I'm starting to run short of on the larger slabs. Nogal was used for the drawer pulls, splines and hinges. The false bottom door is accessed by way of magnets inside of a small tray used as the key and be hidden drawer is held in...
  4. Mens Valet Bandsaw Box, Spalted Hackberry

    Another new creation a mens valet bandsaw box I made this box out of spalted hackberry it has 2 drawers with one hidden making it three and a top tray. Thanks for viewing :)
  5. State Fair Winners

    It's been awhile since I've posted any projects so I thought I'd post a couple that I'm kind of proud of. The first is a bias bowl turned from plywood. The blank was about 4.5" square that I glued up from scrap baltic birch. It was turned mostly with EWT's as the plywood dulled my Thompson...
  6. Texas Style Jewelry Box Number 2 Improved.

    This is pretty much the same design as my most recent Texas style jewelry box, I used the same woods on this box since the first one sold so fast, only the first one was a prototype, I made changes and improvements on this one. Once again hidden on the inside is pure bandsaw box, you'd never...
  7. Bandsaw Drinking Coasters Different Design From The Limb of Spalted Hackberry

    Close to my previous Coasters only I stayed contour to the limb and added a ridge around the coaster to hold in any seepage. Thanks for looking :)
  8. Spalted Hackberry Bandsaw Box with False Bottom

    I have a stock pile of this stuff (Spalted Hackberry) but each box has it's story, this box I used penned hinges and added a false bottom, once again the tray was made as a key for opening the false bottom by way of rare earth magnets, by lifting the tray out and spinning it 180 degrees and...
  9. Mens Valet bandsaw Tray, Spalted hackberry and Alder (Dads Birthday gift)

    After my dad seeing my latest two valet boxes he requested this one without drawers just a tray for his up coming 80th birthday to drop things in, this three tray design, I made out of Spalted hackberry and Alder, it measures 12" x 2" x 6" the two outer trays are 1/2" deeper then the center tray.
  10. Motorcycle bandsaw box.

    This is a box of my own creation, I used Spalted Hackberry and Walnut on this project, and yes I ride :)
  11. Is the Dentist in? Tooth Bandsaw Box

    This is my own design and creation, I constructed this tooth box primarily for any dentist office, it has two nice sized drawers and is made from Spalted Hackberry, great for holding any itmes that a dentist might want to use it for or any other purpose none dentist related. Measurements are 6"...
  12. Two drawer Spalted Heartberry heart box

    This is a design I came up with, I optioned out the center devider as the drawers are held in place at the top and bottom, it has two large drawers with two hidden drawers, one in each drawer, I made this box out of spalted hackberry, measurements are 6" H x 7" W x 3" D. I am in the works of...
  13. The Coffin (Two Coffins) Halloween Boxes

    Well someone had to do it and with Halloween just around the corner it might as well me be me grin my wheels started turning what could I make that would set in this holiday and then it hit me like a ton of bricks A Coffin So then I knew what I wanted to make just didn't know how to go about it...
  14. Plethora of Bandsaw boxes cut from hackberry limbs

    These boxes were cut from yet another hackberry tree that fell out at our family cemetery these total of 8 boxes were cut from just two 16" long x 6 & 8" diameter limbs off of the main trunk, I than sliced them into in 4" sections thus I was able to make boxes from the limbs, since it wasn't on...
  15. Another Bandsaw Jewelry Box Gets a Mix Of Additives

    Pictured: I believe this is one of my best builds to date, This Bandsaw Jewelry Box is a combination of 3 woods, Alder as the core, wrapped with spalted hackberry front and rear with mahogany on the sides, mahogany for the legs, hand made mitered lid for the top which consists of Mahogany for...
  16. Spalted Hackberry in it's natural state

    I've had several comment and show interest in the wood I use on my projects, Spalted Hackberry so I thought I'd give a view of the wood in it's raw state before I make what ever is I'm working on out of it. These trees came from one of our local family cemetery's that my dad and I upkeep, these...
  17. Motorcycle Bandsaw Box in the image of my Softail

    Pictured: This motorcycle Bandsaw Box I made in the image of my Harley Davidson Softail Heritage Classic and has been a popular piece, it is made out of spalted hackberry, a simple 3 drawer design and a fun bandsaw box to make. Build: This is actually a quick and simple build, no hidden drawers...
  18. Men's Valet Chest, Spalted Hackberry

    Men's valet Chest, (Box) made from Spalted Hackberry, my own creation, I got this wood while it was still green and white from a customers property, once I got it home, I put several of the logs in my spalting pit where I nursed it for a 2 year period to get the results you see here. It has very...
1-20 of 70 Results
Top