LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Herringbone Table Set

    I made this 3 piece living room table set based originally on the coffee table plans here: https://www.buildsomething.com/plans/P4FEE5B54793D86E3/HerringboneCoffeeTable Made from southern pine. Table tops are finished with minwax dark walnut stain and 3 coats of satin poly. Fun project, and...
  2. SYP Split-Top Roubo Workbench

    Eleven months to the day (pretty much), my workbench is finished! The bench is a split-top Roubo style made with construction-grade southern yellow pine. It has a leg vise and tail vise (hardware from Lee Valley). The storage platform has a cabinet to house my planes (and keep them free of...
  3. Wood Hinge Pocket Watch Box

    Birthdays always give me a chance to get a little more personal with my woodworking projects. My brother-in-law is a fan of crazy and out there, so I have free reign! For this project I knew he needed a box for his pocket watch, so this is what I came up with. I believe the brown-redish wood...
  4. Mini-Bowls November 2010

    These are some mini-bowls that I've been working on the past month using scrap wood from my shop. The first two are made from mahoghany and the last one is from southern pine. I roughed out the bowls with Foredom and Dremel grinders and do the detail work with X-Acto knives and carving gouges...
  5. another mix of Pens

    Just some shots of some of the Pens I made over the last couple of weekends. Finally getting a chance to head out into the shop as the temps are finally getting bearable in Florida :-)
  6. Wood & Lumber
    #2 Pine Groove and Groove 2 ¾" Thick Deck boards • 272 boards at 7 ¼ " wide x 9' Length • 253 board at 9" wide x 9' Length • The grooves are approximately ¾ " x ¾ " • This decking is turn of the century (1900-1920 circa) • Pest free, mostly nail-free (haven't seen any yet) •...
  7. Blogs
    re-sawing some boards Today we resawed some 3'' wormy soft maple I had extra from my rocking chair project into 1/2'' drawer sides. The largest was about 12'' tall were using a MM20 / Driftmaster / Resaw master blade must say what a great combo. We are also re-sawing some 1'' old growth...
1-7 of 7 Results
Top