LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Copper and Mahogany Box

    Mahogany box with maple pull, cedar ply bottom, and a copper patina top from a piece left over from a garden gate. The sides were cut from a single piece that was resawed then wrapped for grain matching. The legs were formed by cutting away the middle sections with a dado set. It is finished...
  2. Laptop computer desk

    Here is a desk I built for a client that didnt have alot of space. He wanted something that would hide his paperwork and computer when company visited. Its built out of Walnut, with a clear waterbased finish. Nothing real complicated, but it was my first time using SOSS hinges. They are pretty...
  3. Blogs
    Intro and Invitation This summer's projects have been boxes. Lots and lots of boxes. Somewhere along the way I got the idea of combining the wrapping technique with a simple inlay to see how hard it would be to align the lines all around the box. In other words, at the corners. Turns out it...
  4. Blogs
    Progess is very slow...cutting the new plywood, the angles and the splines This is actually the second in the series but I didn't understand how the blog system works. The first in the series is a separate blog entitled TV stand. I will eventually put this on my website in more detail but...
  5. Power Tools, Hardware and Accessories
    I have a contractors tablesaw with a newly installed Forrest woodworker 2 blade. I haven't used it much, but when cutting any material, from hardwood to ply, the blade will vibrate for roughly 1 second every 3 to 10 seconds. When it vibrates, the blade spreads about a 1/64 up to a 1/32...
1-5 of 5 Results
Top