LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Ram rifle stock

    I made this stock for a 7×57 Mauser to use to shoot hi-power silhouettes. That is why I carved a ram target on it. The stock is very similar to The Pig Gun .22 rim-fire stock. http://lumberjocks.com/projects/31591 It is walnut. The barreled action is long gone. It didn't work out very well...
  2. Shields for Two Sons

    These are wooden shields I made for my two oldest sons. The round one is made of two criss-crossing layers of pallet wood with a piece of an old leather belt as the arm strap. The bolts all around are supposed to resemble the rivets that were around mideival shields. It is finished with a few...
  3. Caleb's Tiger & Superman

    I posted else where that I would put up a few pics of my son's Scroll Saw work. Superman is 1/8" Baltic Birch ply and was done when he was 12yrs. The Tiger is Oak with a Walnut base. This was done about 8 months ago when he was 13yrs. He just turned 14 and hasn't touched the saw for a little...
  4. Woodworking Skill Share
    Hello to all from the Magnolia State: A couple of years ago, Fine Woodworking showscased a group of identical colonial secretaries that were built by a group of mostly retired guys in the Washington, DC area. They actually contracted with at New England craftsman to fly to DC two week-ends a...
1-5 of 5 Results
Top