Search Results for ‘sofa table’

This is my cherry refreshment table which features breadboard ends and a small dovetailed drawer. Secondary woods include poplar, aromatic cedar, and walnut pegs. The top drawer rail is attached with lapped dovetails, while the lower shelf is secured with tusk tenons. A hammered drawer pull...

I've been fairly active in the online woodworking community for a while but have never really produced anything I would classify as furniture. I began working on this table about 7 months ago but got sidetracked with a priority shift of renovating 6 rooms in our house. And the standard trying to...

This was my first real project. I welcome any and all criticism. Please let me know what you think I could improve on. I made this entirely from beetle kill pine. I bought all of the wood from Rocky Blue Woodworks out of Westminster Colorado. Those guys run a portable mill and have been...

This table is made from figured walnut and cherry. Its a simple table designed to hold a wine rack on the shelf. Its dimensions measure 32" tall x 48" long x 18" deep.

Here is an entryway table I just finished making. Its' 4 feet wide, 1 foot deep and 30" tall, it's made from 4/4 Walnut, except the top, which is 5/4. This was my first time making anything out of Walnut, I really enjoyed it, it's very nice to work with, and machines beautifully. This also was...

Almost all this wood is found or out of a renovation project. The legs are 'stickers', the wooden pieces that lumber yards use under the stacks of wood. It took time to find 3 wine boxes that were very close in dimensions. The pull handles are from Lee Valley. The drawers simply slide on...

curly cherry natural edge cabinet with natural twig legs. door panel is bookmatched spalted maple and pull is black walnut.

Ambrosia Maple Tables-the taller one is going to serve a dual role, one of which is my callmaking finishing table. And the shorter one, just an end table. This was some of the prettiest, highly flavored wood I have seen in a while.

For a long time I want to make Greene and Greene sofa table. Of course I like Darrel Pearts Aurora Sofa Table and two monthes ago decided to make it. I wanted also to add some inlay elements. Brass elements was made some years ago for the Greene and Greene bed project , but many brass pieces...

Hey, guys! I built a truss style sofa table with a reclaimed douglas fir top. The base is made from 2×4's and 4×4's except I ripped the edges off the 2×4's to square them up and make them look a lot better. The douglas fir came out of a house in East Nashville and is about 70 years old. You...

Our secretary at work wanted another table to match the one she had, which looked similar to the first picture (It didn't have a shelf) but the furniture store didn't sell them any more. So I got the call…

Latest project I've been working on slowly for a few months. It's white oak and walnut with a tung oil finish, then paste waxed. Curved apron wasn't too hard, but the curved mortises in the legs to exactly fit the apron was a bit tricky. I'm a little worried that the bottom shelf will...

May, 2009-My wife wanted a sofa table that would be as wide as our new sofa, and dark in color to match the other furniture pieces in the living room. I decided to use some of the engineered hardwood flooring that was left over from when we had flooring installed. The "engineered" flooring is...

A friend gave me a nice piece of acacia which I used for the top of this small table. The slab was about 3/4", pretty rough and badly bowed. It was also stained on the one end, I'm assuming from some oil that leaked from his mill. I let it sit for a few weeks with some weights on it, trying to...

I have long been a big believer in building and designing furniture that is not only functional but visually pleasing furniture. To that end, I have been able to experiment with several different types, styles and periods of furniture . I have complete respect for the traditional forms and...

This Jatoba Sofa Table measures 15" x 40" x 30" high. The apron or skirt is attached to the legs with mortise & tenon. Protected with a high gloss pre-catalyzed lacquer rubbed to a mirror finish.

Here is a sofa table I made for my in-laws this past winter. I was surprisingly able to build it with 2 2×4's (excluding the top and shelves) and used only 4 screws and those were to mount the top to the frame using small rabbeted wooden blocks in slots on the frame. The 'X's are half-lapped and...

Hello fellow LumberJocks. This weeks build video is a pine pocket hole sofa table. It has tapered legs, mortised bottom shelf, spacious drawers, and a lot of pocket hole screws. Sorry I dont have that many pictures of it. As soon as I was done sanding I had to load up for delivery. You can see...

My wife has been asking me to build her this hallway table that I designed for several months now, and as all male woodworkers know, you have to keep the wife happy with this hobby. So after three days of work, here it is. It built it from 3/4" Red Oak and stained it with Red Oak. Drawers were...

This was a custom project for a home theater. The owner wanted a custom bartop that would sit behind a large couch which was directly in front of their home theater screen. We settled on a design that would allow bar stools to sit under the bartop at a normal bartop height of 43". The bartop is...