LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 102 Results
  1. Sofa Murphy Bed | Custom

    This is a bed that was completed in February 2009, It is my standard Euro style with quite a few modifications. One of the new design features of this one is the sofa. This is a sofa that I designed to be placed in front of the bed when it is in the up position. When the bed is needed the...
  2. A carpenter making a birdhouse.How cliche!

    Birdhouse made of construction grade cedar.I was planning to make it entirely without any nails or screws, but gluing up proved difficult and I opted to use brad nails to ease in assembly 1: the top sits in a rebated dado to slide in and out, and is secured in place with a sliding stop...
  3. Custom XL Sliding Barn Door

    Here's a massive sliding barn door I recently made for a customer. This thing weighs about 400-500 lbs. and is made of steel, birch plywood, and grey hemlock siding from our lot. It measures 64" wide and 105" tall and slides over into a recess the customer had built into the room. We sprayed the...
  4. Mahogany Tool Box w/Sliding & Locking Overhead Drawer Stop

    First real project from design to finish from rough sawn hardwood. Three hand cut dovetail drawers in a hand cut dovetailed carcass. The front frame and panel piece slides out and hinges down to keep the drawers in place while transporting. It locks via a half-mortised brass lock and features a...
  5. Contemporary Reclaimed Barn Wood Sliding Door

    Here's a recent build I did using different barn woods from our lot. The customer picked out all of the different pieces at the lot and then I ripped them, jointed the back side, and brad-nailed/adhered them to the birch plywood. when it was fully assembled, our finish guy did a great lacquer...
  6. Red Oak sliding step stool

    I've actually built several of these. Nothing but red oak glued up and shaped. Usta go to an engraver a couple of towns over, get names engraved into the top step, but that's kinda fallen by the wayside. Finished with 2 coats of hand-rubbed poly.
  7. Barn door with stain glass

    Rustic Barn door I built for friends. They made the stained glass years ago and I built the door to fit. Came out great for a first time door build.
  8. Sliding Compound Miter Saw (SCMS) Station

    Sliding Compound Miter Saw (SCMS) Station An inexpensive but very functional SCMS station made from scrap wood and a give-away conference table. My SCMS station is not fine art furniture but it works as good. Its design was determent from what I had available in the shop. The table is a...
  9. Sliding Door Tool Cabinet

    Cabinet I made out of pine and shiplap. Has two sliding doors with pegboard. Used plans from Woodworking magazine. Bunch of cubby on the bottom.
  10. Sliding Drill Press Fence Jig

    this is an extremely simple and useful jig, IF your drill press table is square. the two pieces on the side need to be pressed up against the sides of the table other wise the jig wont have a nice piston fit and will move when you clamp it. then it gets clamped in place to the table...
  11. Sliding Miter Saw Station

    This is my first project that I have decided to display on this site. I am newly retired from the IT world, and have always wanted to do more woodworking. I have enjoyed perusing this site for so many great ideas! This best thing about this build is the sliding middle support section. It...
  12. Japanese Planing Board w/Sliding Dovetails

    If you prefer not to read, the video is here View on YouTube My workspace is pretty limited. in being so I have to get creative and look to different means for accomplishing my goals. That's one of many reasons I study and practice Japanese woodcraft, the entire thought process behind the...
  13. Live Edge Sliding Sofa Table

    We built this sliding sofa table from a huge live-edge Eucalyptus board. We used walnut for the base, which was joined with mortise and tenons, then secured with two 3/8 inch dowels through each joint. It came out beauiful as we finished it with no pigment, just seal coat(non-waxed shellac)...
  14. Beer Serving Tray

    One of the great aspects of being a woodworker is that we can design and build things that are specific to our needs that we would never find in a store. This is one of those things. I live in an apartment building in which I have unauthorized access to my roof. That means I go up there a lot...
  15. Sliding 45 Deg Sled

    I was bringing back to life a Grizzly table saw that I've had buried for about 9 years It was missing everything (wings, fence, blade, washer, nut, plate, dust collector door) I got a fence at a going out of business Woodworkers Warehouse about 8 years ago, some wings at a Grizzly Tent sale. I...
  16. Tapered Sliding Dovetail Slot Jig

    If you know that driving a long sliding dovetail pin into a long sliding dovetail slot is difficult, you'll like my new jig. To fabricate my tapered sliding dovetail slot jig I used a 7mm HDF (High Density Fiberboard) laminated floor board because it is slick, durable and rigid. The final...
  17. Maple Sliding Dovetail Candle Box

    Tried making a candle box. I just used dado's and rabbits to put the box together wasn't trying to go too fancy. Then i made a dovetailed lid and groove to slide in, next time i think i'd just do a dado'd lid. Anyways i'd love to hear any comments good and bad. Thanks for looking guys.
  18. Anjali playing with the cats

    This was a christmas present for a friend, of her daughter, commission by her mum. http://www.flickr.com/apps/video/stewart.swf?v=109786
  19. Shipping box

    A box made to ship things back and forth. To ship it you just have to flip the address plate over!
  20. Sliding kitchen board for appliances

    I have a client who's wife didn't like picking up her big mixer and moving it on the counter. It was very heavy and cumbersome for her. She said she wanted a "rolling cutting board" out of oak that would be able to hold up and slide the mixer on top of the counter. I told her husband I'd cook...
1-20 of 102 Results
Top