Search Results for ‘sliding doors’

Cordless Tool Battery and Charger Shop Storage Cabinet I.Problems: A. No central location for battery chargers or batteries placed around shop on counters and benches. B. Wood dust on and in chargers. C. Remembering to keep batteries charged. D. Remembering to not leave batteries on...

Well, that didn't take long!!! Client hung the doors the same day I delivered them to her. I'm going to get her to do more installations for me in the future. This is the results of my previous project post.

Low walnut cabinet with sliding doors similar to one I posted in cherry. finish is tried and true varnish. can see more of my things at my website ( www.jcsterling.com ) or facebook page (...

Some of our recent builds. Both new and reclaimed lumber used in building doors. Assorted finishes including stain/urethane, urethane on natural reclaimed hemlock, white washed reclaimed grey barn board, urethane on barn roofing boards, blackened red barn board/natural hemlock, painted white...

This door was built for CITY TV for the show Cityline. We were asked to give them a door for a show on decorating your home like a cottage, or bringing a tough of cottage style decor into your home. We built is Shaker Style to keep it simple, and we added a brace in the middle. I wanted to do...

cherry cabinet with slidng doors, walnut butterflies,and spalted maple panels. gread sliding door hardware from Rockler makes for smooth running doors ( http://www.rocklerpro.com/product.cfm?page=2280&filter=88155&pn=88155) . p.s. yes I am aware that the layout of butterflies on the top is not...

First post! Recently finished building our new home, so I decided to build our dinning room table. Found a deal on some red gum slabs and had a metal frame welded together. Placed cut pieces side by side and used epoxy to fill in gaps.

I was tired of running out to my storage closet in the basement every time I need a nail or screw, so I built this simple wall cabinet with sliding doors. I used a router to carve out all the tracks for the sliding doors and also made dadoes for the shelves. Assembled with glue and pocket...

I'm not a big fan of sliding doors, but I wasn't on the mood to mess with hinges, etc., Especially where this cabinet is supposed to go, which is on the wall above a closet door. (The opening salvo of my war on clutter.) The cabinet itself is boring, but I thought the doors might be of...

I thought I would include a waterbed project since waterbeds are where we got our start over 35 years ago. This one is built using oak wood and has a bookcase headboard. The raised panel doors on the headboard slide to gain access to each compartment. The pedestal under this one is a 9 1/4"...

Made from Hard Maple. Sprayed white and then distressed to look old. Finished with General Seal, Arm-R-Seal water based gloss finish. Its primary purpose was to keep things, like the Cello, out of the reach of our newest baby boy. An added bonus is that it also houses my woodworking library in...

I can't believe it's been so long since I posted a project. Here are three bowls each made from a 8"-dia x 2" piece of figured maple. The first is a more standard bowl, the second has a wider rim and the third has a very wide rim and thick walls to show off the figure in the wood. On the 3rd...

Well, this is by no means a "fine woodworking" project but it was different enough that I wanted to share it. What is it: A large wooden labyrinth that I helped my brother build for his work. How we built it: Pic 2 shows the design process (good ole blue tape and chalk). Its roughly 4' by 5'...

This is a bed that was designed and built for storage needs. The pedestal features 12 large drawers They are 18×18. I utilized as much of the depth as possible. The headboard has two extra large roll out storage bins. In between the drawer units is storage from the foot to the head of...

I needed a piece of furniture for my Pavoni Espresso machine and other coffee machines that I have. After trying to locate a quick fix second hand in the right height, I realized that I would have to build it myself to get what I wanted. The idea was something simple and robust to withstand...

This is a record cabinet I made for my best friend and his wife Allison. She had come to me 2 years ago with the desire to have me make a cabinet like this, which she had been dreaming about for some time. Some how the project fell through and I didn't make it. So I decided to surprise them...

Thanks to L.J. members who have previously posted birdhouses and using their projects I have got some Christmas present made. The birds are Australian parrots which I carved out of pine using my beloved DREMEL. The birds were quick and easy to do, a slap of paint and well they look...