LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Epic Wooden PC Case - WoodWorkLIFE

    Hey Guys, This was a very special project combining two of my biggest passions, woodworking and technology. I made PC case or a modded PC case whatever you want to call it, completely out of wood. For this project I used two contrasting woods that work wonderfully together, Sycamore and...
  2. Shaggy Tails Pet Salon Sign

    Used my Inventables Xcarve CNC machine to carve and paint a sign for a local business, Shaggy Tails Pet Salon. They provided the logo and information and i turned it into a file using Vcarve and Easel that my Xcarve could cut. Used 3/4" plywood to make the sign and painted it with an exterior...
  3. Paint Brush won't Hold Paint

    I am a painter: that's what I do, I like to paint things. but, sometimes I don't take good care of my tools. below is the story - - - .
  4. Panels from the Big Lynn Lodge, Little Switzerland, NC

    These panels were a commission for the Big Lynn Lodge, in Little Switzerland, North Carolina…a great place if you are in the area. Some are of Oak and some are of Ash. They measure 3'x5', with the exception of the tree, which is 2'x3'. For this job I paid a friend, Kevin Wadell, furniture...
  5. Designing Woodworking Projects
    Greetings-Looking for information, plans, etc. (for free or for purchase) on making a California-King four-poster bed. Something like here: but with the bottom being a platform bed with drawers (probably six to a...
  6. Blogs
    Video: How to Carve a Sign, Part 1 In this two-part video series I'll show you how to carve and finish a sign from high-density urethane (EZboard). I hope this is helpful to you. Your comments and questions are welcome. More info on EZboard can be found at
1-7 of 7 Results